Kaoko Gas Regler für Yamaha

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: YAMAHA Tenere 700 from 2019- and Super Tenere from 2018- onwards, all models with original bars and original bar ends. Delivery: right side Note: suitable with OEM hand guards.Note: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: YAMAHA XT1200Z from year '10- onwards all models with original bars and original bar ends. Delivery: right side Note: suitable with OEM hand guards and heated grips; and Barkbusters BHG40 Hand GuardsNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: YAMAHA FJR1300, YZF-R1 year '04- , YZF-R6 all models with original bars and original bar ends. Delivery: right sideNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: YAMAHA TENERE XT660Z all models and years with original bars and original bar ends. Delivery: right side Note: suitable with OEM and Barkbuster handguards.Note: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: YAMAHA Tracer MT09, FJ-09 year '14- to '15 all models with original bars and original bar ends. Delivery: right side Note: suitable with OEM hand guards and Barkbuster handguardsNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: YAMAHA TMAX 500 Scooter from year '10- onwards, 530 Scooter from year '12- onwards all models with original bars and original bar ends. Delivery: right sideNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: YAMAHA V-MAX from year '09- onwards all models with original bars and original bar ends. Delivery: right sideNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: YAMAHA Fazer 1/FZ1 upto year '15, Fazer 6/FZ6, TDM850/900, XJ1300, XJR1200/1300, MT01, XJ900/XJR900, XJ6 year '14- onwards , FZ6R year '15- onwards all models with original bars and original bar ends. Delivery: right sideNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: YAMAHA MT09 year '13- onwards , MT09 Sport Tracker/ABS upto year '15, MT09 Street Rally/ABS upto year '15, MT-07/FZ-07 year '13- onwards / Niken year '18- onwards all models with original bars and original bar ends. Delivery: right sideNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.