Kaoko Gas Regler für Honda Motorräder

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: Honda CB1100A from year '11- onwards , CBR600RR from year '07- onwards all models with original bars and original bar ends. Delivery: right side Note: for HONDA models with 30mm outer diamter bar ends , with 19mm inner diameter handle bar tubes , Please check handle bar ID before ordering this part number.Note: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: HONDA XL1000V Varadero, XRV750 Africa Twin all models and years with original bars and original bar ends. Delivery: right side Note: for use with OEM grip or Oxford heated gripsNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: different Honda models (see application list below) with original bars and original bar ends. Delivery: right sideNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: F6B Goldwing year '13- onwards , VFR800/Blackbird year '01- onwards , CBR1100XX Blackbird, VTR1000 Firestorm year '98 to '08, CBR650F from year '15- onwards, CTX700/N/ND/DCT year '13- onwards all models with original bars and original bar ends. Delivery: right side Note: for HONDA models with 19mm inner diameter bars and 31mm OD bar ends.Note: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: HONDA VFR1200X/XD from year '12- to '15 all models with original bars and original bar ends. Delivery: right sideNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: HONDA VFR800X Cross Runner from year '15- to '18 all models with original bars and original bar ends. Delivery: right sideNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: HONDA Africa Twin CRF1000L year '16- onwards ,Africa Twin Adventure Sports year '18- onwards , X-ADV year '17- onwards , Honda VFR1200X Crosstourer year '12- onwards , VFR1200 XDJ Cross Tourer Highlander year '18- onwards , VFR1200 DCT Tour Edition year '18-onwards all models with original bars and original bar ends. Delivery: right sideNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: VFR800/BLACKBIRD from year '01- onwards , CBR1100XX Blackbird, F6B Goldwing from year '12- onwards all models with original bars and original bar ends. Delivery: right side Note: Silver finish , for models with a Diameter of 31mm at bar ends.Note: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: different Honda models (see application list below) with original bars and original bar ends. Delivery: right sideNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: VFR800/BLACKBIRD from year '01- onwards , CBR1100XX Blackbird, F6B Goldwing from year '12- onwards all models with original bars and original bar ends. Delivery: right side Note: Stainless steel finish , for models with a Diameter of 31mm at bar ends.Note: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: HONDA ST1300/ST1300 Pan European from year '02- onwards all models with original bars and original bar ends. Delivery: right sideNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: HONDA VRF750 RC36 from year '93- to '98 all models with original bars and original bar ends. Delivery: right sideNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: HONDA Silverwing 600CC Scooter from year '02- onwards all models with original bars and original bar ends. Delivery: right sideNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: CB600 Hornet year '08- onwards , CB1000R Predator year '08- onwards , CBF1000/F, CBF600,CB1300 all models with original bars and original bar ends. Delivery: right side Note: for HONDA models with 30mm outer diamter bar ends , with 17mm inner diameter handle bar tubes , Please check handle bar ID before ordering this part number.Note: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: HONDA NT700 Deauville from year '09- onwards all models with original bars and original bar ends. Delivery: right sideNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: HONDA ST1100 all models and years with original bars and original bar ends. Delivery: right sideNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: HONDA VFR800X Cross Runner from year '11- to '14 all models with original bars and original bar ends. Delivery: right sideNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.