Kaoko Gas Regler für BMW

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: BMW R1200GS / R1200GS Adventure / R1200ST models from 2008-2012 with original bars and original bar ends (screw 80mm). Delivery: right sideNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: BMW R18 from 2020- onwards. Delivery: right side Note: Suitable without OEM HandguardsNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: BMW R 1200 / 1250 RS Models from 2015- onwards and R 1250 RT ab 2019- onwards. Delivery: right side Note: Suitable without OEM HandguardsNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: BMW C650GT Scooter from year '13- onwards & C600 Sp/Evo Scooter from year '13- onwards all models with original bars and original bar ends. Delivery: right side Note: Suitable with Kaoko bar ends ChromeNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: BMW F800R / S1000R Models from 2015-2020 and G 310GS from 2016-2020. all models with original bars and original bar ends. Delivery: right sideNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: BMW BMW K1600GT, K1600GTL from year '12- onwards all models with original bars and original bar ends. Delivery: right side Note: suitable with Kaoko bar ends blackNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: BMW F700GS/F800GS(Adventure) from year '13- onwards all models with original bars and original bar ends. Delivery: right side Note: for use with OEM steel back bone hand guards) - Technical installation and mechanical experience required. OEM handle bar clamp needs to be repositioned along the handle bars, and the handle bar clamp needs shimming to allow proper fit to OD of handle bar.Note: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: BMW F650GS models up to 2008 / G650GS models upto 2010 without heated grips. Delivery: right side Note: Not suitable with heated gripsNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: BMW S1000RR year 2009- onwards , HP4 year '13, F800R upto year '14 all models with original bars and original bar ends. Delivery: right side Note: Also for Barkbusters VPS Storm Hand guardsNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: R1200GS LC (2013-2019) R1200GS Adventure LC (2013-2019) R1200R LC (2015-2019) S1000XR (2015-2020) R1200GS Trophy (2015-) R1200GS Rallye (2017) F750GS (2018-) F850GS (2018-) R1250GS (2019-) R1250R (2019-2020) F900R (2019-) F900XR (2020-) all models with original bars and original bar ends. Delivery: right side Note: for use with or without OEM Handguards; with Touratech Handguards, and with Barkbusters BHG50-NP HNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: BMW C650GT Scooter from year '13- onwards & C600 Sp/Evo Scooter from year '13- onwards all models with original bars and original bar ends. Delivery: right side Note: Suitable with Kaoko bar ends blackNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: BMW F800S / F800ST from 2006- onwards all models with original bars and original bar ends. Delivery: right side Note: Please tell us , whether you have a Countersunk screw or a Cap ScrewNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: BMW R1100S all models and years with original bars and original bar ends. Delivery: right sideNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: BMW F800GS, F650GS Twin from year '08- to '12 , R9T from year '14 - to '19 / R9T Scrambler from year '16- to '18 all models with original bars and original bar ends. Delivery: right sideNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: BMW R1200GS / R1200GS Adventure / R1200ST models up to year 2007 with original bars and original bar ends (screw 90mm). Delivery: right sideNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: BMW K1300/1200GT / R1200RT upto year ´09 / R1150R/RT / R1150GS/Adventure / R1100R/RT / R1100GS / R850R/GS / R1150RS year´04 all models with original bars and original bar ends. Delivery: right side Note: Also for Barkbusters VPS Storm Hand guardsNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: BMW R1200RT from year 2010-2013 / F700GS from year 2013- onwards / F800GS from 2013- onwards all models with original bars and original bar ends. Delivery: right side Note: suitable with Barkbusters BHG040 hand guardsNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: BMW K1600GT, K1600GTL from year '11- onwards all models with original bars and original bar ends. Delivery: right side Note: suitable with Kaoko bar ends ChromeNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: BMW R1200C/CL all models and all years with original bars and original bar ends. Delivery: right side Note: suitable with chrome tapered bar ends (doesn't fit models with plastic end caps)Note: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: BMW K1200 S/R / R1200 S/R / K1300 S/R all models and all years with original bars and original bar ends. Delivery: right side Note: suitable with Barkbusters BHG040 hand guardsNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: BMW G 310 GS / R Models without handguards. Delivery: right side Note: Suitable without OEM HandguardsNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: BMW F800GT from year '13- onwards all models with original bars and original bar ends. Delivery: right sideNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: BMW G650GS/Sertao from year '11- onwards all models and years with original bars and original bar ends. Delivery: right sideNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer's (OEM) end weight. It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand. The main features of the Kaoko Throttle Stabilizers are ;- • Greatly reduces rider fatigue and strain on hand and wrist. • Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set. • Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action. • Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption. • Very little maintenance is required. • Takes less than 5 minutes to fit. This Kaoko Throttle Stabilizer kit is designed to fit the APRILIA RSV4R (2009-2015) models. Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.suitable for: BMW G650X Challenge / Country / Moto all models and all years with original bars and original bar ends. Delivery: right side Note: Not suitable with heated gripsNote: The Cruise Control is only permitted in road traffic as a bar end weight. The function for locking the throttle grip may not be used within the scope of the StVZO.