Denali Beleuchtung und Hupen
Entdecken Sie die leistungsstarke Denali Beleuchtung und Hupen für Ihre Sicherheit unterwegs. weiterlesen...
R&G Ancillary Light Mounting Bracket for Kove 800X PRO 2024- (mounts to front fender)
€48.90*
R&G Ancillary Light Mounting Bracket for Kove 800X PRO 2024- (mounts to front fender)For Denali D2 or smaller (Light not included)
DENALI DialDim Lighting Controller for BMW R 1250 GS / Adventure 2019-
€335.90*
Designed specifically for the BMW R1250GS (2019 - 2023) & BMW R1250GS Adventure (2019 - 2023)
Our ground-breaking DialDim™ Lighting Controller features a multicolor halo dimming switch that allows you to independently turn on/off and dim two sets of 3-Wire auxiliary lights from a single consolidated wiring harness. The LED halo switch displays your exact settings and allows for effortless dimming on the fly. The blue halo controls light set one and the green halo controls light set two; simply double click to switch between the two circuits.
The controller also features high beam, turn signal, and horn inputs to unlock intelligent flash features that can cancel your aux lights with your turn signal, flash your aux lights as a turn signal, or strobe your lights when you sound your horn.
More Features, More Feedback!
Our patented multicolor halo dimmer switch can do a whole lot more than just turn your lights on and off and dim them. For starters, it displays the exact intensity of both of your lights so you're never stuck guessing if your lights are on, or what intensity they're set to.
Thanks to the electronically fused circuits, the halo switch can also display, and allow you to select, the fuse values for each circuit. And if a fuse trips, the LED halo will turn red providing real-time feedback and allow for resetting the fuse.Features
ON/OFF & Dim - Independently control two sets of lights on/off and intensity level using the single DialDim™ Switch. The blue halo controls light set one and the green halo controls light set two. Double click to switch between the two circuits.
High/Low Sync - Your auxiliary lights will automatically switch between your selected dim setting to full intensity with the factory high beam switch. Simply connect the blue input wire to your vehicle's high beam circuit to enable this feature.
Stealth Mode - A clever 0% dim setting on the switch allows your lights to be "off" during normal driving conditions but will jump to 100% intensity with your vehicle's high beam switch. The lights will also react to turn signal and horn inputs in this mode but will remain off when no inputs are detected.
Cancel with Turn Signal - When enabled the main lights (blue circuit 1) will cancel in sync with your signal to prevent "washing out" your factory turn signal. Simply connect the yellow and orange input wires to your vehicle turn signal circuit to enable this feature.
Flash as Turn Signal - When enabled your amber visibility lights (green circuit 2) will flash in sync with your factory turn signals. Simply connect the yellow and orange input wires to your vehicle turn signal circuit to enable this feature.
Strobe with Horn - When enabled your auxiliary lights on both circuits will strobe at 4Hz when you sound your horn. Simply connect the green input wire to your vehicle horn circuit to enable this feature.
Electronically Fused Circuits - Both light circuits are electronically fused and can be set right from the switch itself! The halo will illuminate red to notify you when a circuit fused is tripped.
Voltage Display Indicator - Upon vehicle startup, the switch halo will flash green to indicate a healthy battery voltage, or flash red to indicate a battery voltage that is below 11.8v.
Low Voltage Cutoff - If the battery voltage drops below 10.8v the lights will not power on preventing you from being stranded. The switch halo will flash 4 red LEDs to indicate the low voltage condition.
R&G SoundBomb Horn Mounting Bracket Suzuki SX 650 2016- / SV 650 X 2018-
€28.91*
This vehicle-specific horn mount allows you to mount the DENALI SoundBomb Original Dual-Tone Air Horn in the optimum location on your motorcycle.
R&G SoundBomb Horn Mounting Bracket Kawasaki Concours 1400 / GTR 1400 2008-2014
€21.90*
This vehicle-specific horn mount allows you to mount the DENALI SoundBomb Original Dual-Tone Air Horn in the optimum location on your motorcycle.
DENALI 2.0 D4 Amber TriOptic Lens Kit
€69.90*
This Amber TriOptic Lens Kit for D4 lights is designed to maximize visibility in foggy and rainy conditions. The amber colour of the lens increases visibility in fog and rain by blocking blue frequencies from the light, which reflects off water vapour and decrease vision. The kit includes two spot lenses and two True-Hybrid lenses. Use two spots for maximum distance, two Hybrid lenses for a 50/50 True-Hybrid or one of each to create a Spot-Hybrid that adds some additional close range fill while maintaining distance.
What's In The Box?
(x2) Amber D4 Spot Lens
(x2) Amber D4 True-Hybrid Lens
Tip
DENALI Slip-On Blackout Cover Kit for D3 LED Lights
€16.90*
DENALI Slip-On Blackout Covers keep your bike street legal in states that require aftermarket lighting to be covered on public roads. Once you get to the trails, slip the covers off of your DENALI D3 lights and go.
The rugged silicone construction of the Slip-On Covers protects from rocks and other debris, providing an even longer lifespan to your DENALI D3 lights.
DENALI Crashbar Light Mounting Adapter for Select BMW Motorcycles
€56.91*
The DENALI adapter for BMW style light mounts allows fitment of any DENALI auxiliary light kit on the factory original light mount. Laser cut steel brackets provide excellent support to position the lights securely to the motorcycle. No drilling, cutting or any other modifications are required. Complete your BMW auxiliary light installation with a set of light mount adapters from DENALI!
Features:
Fits to BMW original light mounts
Allows fitment of DENALI lights to the factory BMW mounting tabs
No modifications needed
Simple bolt-on installation
Compatible with all DENALI light pods & light kits
What's in the box:
DENALI light mount adapter (pair)
Mounting hardware
Installation instructions
Please note: NO LIGHTS are included with this kit
SoundBomb Horn Mounting Bracket BMW R 1250 GS / GS Adventure 2021-
€53.90*
This vehicle specific split horn mount allows you to mount the DENALI SoundBomb Split Dual-Tone Air Horn in the optimum location on your BMW R 1250 GS/GSA. This kit includes one powder-coated steel bracket to mount the horn compressor behind the cylinder head and a second bracket to mount the horn acoustic unit centered under the fairing stay.
This split horn mount (DENHMT.07.11001) was recently redesigned to replace our original horn mount (DENHMT.07.10700) to ensure that the horn components can only be installed in one specific orientation eliminating the possibility of installing them incorrectly and maximizing suspension clearance. The two M8 mounting points and indexing tab on the acoustic unit bracket ensure that the horn can not rotate once installed.
DENALI DialDim Lighting Controller for Honda CRF 1100 L 2020-
€335.90*
This pre-configured product bundle includes our standard DialDim Lighting Controller and an Africa Twin 1100 plug-&-play wiring harness. The vehicle-specific harness simply plugs in-line at the Africa Twin headlight, horn, and turn signal connectors to enable dozens of useful lighting features and settings!
This bundle part number DNL.WHS.22500 includes:
(1x) DENDNL.WHS.20500 - DialDim Lighting Controller
(1x) DENDNL.WHS.20400 - DialDim wiring harness for Honda Africa Twin 1100
Tip
DENALI 2.0 D3 High-Performance Fog Light Pod (Single)
€229.90*
The Denali D3 LED lights are built upon a decade of DENALI innovation to deliver the highest performing street-legal fog light to hit the market. Their proprietary fog optics were painstakingly engineered to reach the maximum allowable candela (beam distance) for each of the regulated lighting zones for both the North American SAE/DOT and European Union ECE regulations! The result is a truly unique lens that performs as well as it looks, capable of generating a super-crisp fog beam that is 450 feet long by 350 feet wide at 1 lux (per pair)! No other street-legal fog light even comes close!
The D3 is also available in our signature TriOptic™ beam system that provides a spot and hybrid beam option (in the same kit) for drivers wanting uncompromised light output when you need it most.
Features
Best in class street-legal fog beam (SAE/DOT & ECE certified)
High-Intensity Series Cree LEDs outputting 2800 lumens per pod
DataDim™ 3-wire smart-dimming technology (compatible with all DENALI dimming controllers)
DrySeal™ Submersible Waterproof light can withstand the most extreme environments
Impact PC™ Polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels.
LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
Low profile mounting bracket with stainless steel hardware included
Beam Performance (pair)
Beam Distance (at 1 lux): 450 feet (137 meters)
Beam Width (at 1 lux): 300 feet (91 meters)
Specs (single pod)
Pod Size: 3.5" (90mm) Round x 3.0" (76mm) Deep
LED: (4x) 11 Watt Cree XP-P LEDs
Power Draw: 40 Watts (3.3 Amps)
Lumens: 2800
DataDim™ Compatible: Yes
Operating Voltage: 9-32V DC
IP67 Waterproof & Submersible
Fog Lens Certifications: SAE/DOT J583 & ECE R19 What’s in the Box?
(1x) D3 LED Fog Light Pod
(1x) Hinge Mounts with M8 Stainless Steel Hardware
(1x) Wiring Pigtail
DENALI T3 Rear Switchback LED M8 Turn Signals (Pair)
€250.90*
The T3 is a unique and innovative approach to the common turn signal, blending white visibility lighting, red brake lighting, and amber turn signal lighting into one compact housing. The rear T3 signal pods feature super bright red LEDs for run and brake functionality that also switch to amber when your turn signal is activated, while the front T3 turn signals feature super bright white running lights that switch to amber when your turn signal is activated. Unlike other switchback turn signals, the T3s feature two separate rows of high-power single-color LEDs as opposed to weaker bi-color LEDs. The result is a shockingly bright light pod that rivals the intensity of 10 watt LED driving lights.
This M8 stud version of our T3 signal pod is designed to replace your factory turn signals. The T3s amber signal light is far brighter than stock but much smaller in size. The additional red brake light circuit provides maximum visibility without having to add other auxiliary brake lights.
The sleek low-profile housing coupled with high-power LEDs make the T3 the brightest and most versatile switchback turn signal on the market.
Installation Notes: Turn load resistors are necessary to prevent hyper flashing of the signals when swapping from incandescent to LED turns signals. Use DNL.WHS.12700 when replacing original 10-watt signals, and DNL.WHS.12800 when replacing original 21-watt signals.
Features
Switchback Functionality: Red Run/Brake Light & Amber Turn Signal
Dual Circuit Brake Light: 50% Low, 100% High
180-degree viewing angle
Six high power LEDs (per pod)
Low-profile design
Easy connection to vehicle brake and turn circuit
E-Mark approved run/brake and turn signal
Specs
Total Power Draw: 0.02A Run, 0.21A brake, 0.52A Turn Signal
Input Voltage: 12V DC
Size: 2.9" x 1.13" x 0.5"
Weight: 0.08 lbs
Raw Lumens: 870
Waterproof: IP67What’s In The Box?
(2x) Rear M8 Turn Signal
(2x) Wiring pigtails with waterproof connectors
(2x) Mounting Nuts
(4x) Posi-Taps
(4x) Posi-Locks
Illustrated installation instructions
DENALI T3 Front Switchback LED M8 Turn Signals (Pair)
€250.90*
The T3 is a unique and innovative approach to the common turn signal, blending white visibility lighting, red brake lighting, and amber turn signal lighting into one compact housing. The front T3 turn signals feature super bright white running lights that switch to amber when your turn signal is activated, while the rear T3 signal pods feature super bright red LEDs for run and brake functionality that also switch to amber when your turn signal is activated. Unlike other switchback turn signals, the T3s feature two separate rows of high-power single-color LEDs as opposed to weaker bi-color LEDs. The result is a shockingly bright light pod that rivals the intensity of 10 watt LED driving lights.
This M8 stud version of our T3 signal pod is designed to replace your factory turn signals. The T3s amber signal light is far brighter than stock but much smaller in size. The additional white DRL circuit provides maximum visibility without having to add a second set of auxiliary lights.
The sleek low-profile housing coupled with high-power LEDs makes the T3 the brightest and most versatile switchback turn signal on the market.
Installation Notes: Turn load resistors are necessary to prevent hyper flashing of the signals when swapping from incandescent to LED turns signals. Use DNL.WHS.12700 when replacing original 10-watt signals, and DNL.WHS.12800 when replacing original 21-watt signals.
Features
Switchback Functionality: White DRL & Amber Turn Signal
Dual Circuit DRL: 50% Low, 100% High
180-degree viewing angle
Six high power LEDs (per pod)
Low-profile design
Easy connection to vehicle DRL and turn circuit
E-Mark approved DRL and turn signal
Specs
Total Power Draw: 0.04A DRL (Low) / 0.11A (High), 0.52A Turn Signal
Input Voltage: 12V DC
Size: 2.9" x 1.13" x 0.5"
Weight: 0.08 lbs
Raw Lumens: 870
Waterproof: IP67What’s In The Box?
(2x) Rear M8 Turn Signal
(2x) Wiring pigtails with waterproof connectors
(2x) Mounting Nuts
(4x) Posi-Taps
(4x) Posi-Locks
Illustrated installation instructions
Tip
DENALI 2.0 D3 TriOptic LED Driving Light Pod (Single)
€252.90*
Denali's new D3 LED lights are built upon a decade of DENALI innovation to deliver the highest performing 36-watt street-legal driving light to hit the market. Their D3 driving light features our signature TriOptic™ beam system that includes a spot and hybrid driving lens with each light pod. Unlike previous TriOptic™ lights, the D3 hybrid driving beam is ECE and SAE compliant to deliver an impressive street-legal high beam in North America and European Union countries. But what if you're not concerned with street-legal precision and just want off-road outrageous? We got you covered too! The D3 spot lens was engineered for maximum beam distance measuring over 1900 feet at 1 lux (per pair). No other 36-watt light even comes close. The spot beam is so impressive it actually outperforms top-tier competitor's lights that are twice its size.
Features:
TriOptic™ Lens System (includes spot and hybrid lenses with each pod)
Best in class street-legal spot and hybrid beams (SAE/DOT & ECE certified)
High-Intensity Series Cree LEDs outputting 2100 lumens per pod
DataDim™ 3-wire smart-dimming technology (compatible with all DENALI dimming controllers)
DrySeal™ Submersible Waterproof light can withstand the most extreme environments
Impact PC™ Polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels.
LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
Low profile mounting bracket with stainless steel hardware included
Additional SAE/DOT & ECE certified hybrid driving lens included (spot lens installed)
Amber & Selective Yellow lenses available (sold separately)
Specs (single pod):
Pod Size: 3.5" (90mm) Round x 2.62" (66mm) Deep
LED: (3x) 11 Watt Cree XP-P LEDs
Power Draw: 36 Watts (3 Amps)
Lumens: 2100
DataDim™ Compatible: Yes
Operating Voltage: 9-32V DC
IP67 Waterproof & Submersible
Hybrid Lens Certifications: SAE/DOT J581 & ECE R112
Spot Lens Certifications: ECE R112
Beam Performance (pair):
Spot Beam
Beam Distance (at 1 lux): 1910 feet (582 meters)
Beam Width (at 1 lux): 100 feet (30 meters)
Combo Beam (1 spot, 1 hybrid):
Beam Distance (at 1 lux): 1520 feet (463 meters)
Beam Width (at 1 lux): 175 feet (53 meters)
Hybrid Beam (EU certified lens):
Beam Distance (at 1 lux): 1050 feet (320 meters)
Beam Width (at 1 lux): 225 feet (69 meters) What’s in the Box?
(1x) D3 LED Light Pod (spot lens installed)
(1x) D3 Hybrid Lens
(1x) Hinge Mounts with M8 Stainless Steel Hardware
(1x) Wiring PigtailPlease note: The Hybrid lens (included in this kit) Is the only EU-certified lens for this kit.
Denali Auxiliary Light Mount For Honda Africa Twin CRF 1100 L Adventure Sports 2020-
€97.90*
The DENALI auxiliary light provides a secure mounting solution for fitment of aftermarket lighting. Robust steel bracketry is laser cut for a precise fit and finished in a durable black powder coating. This versatile light mount is compatible with DENALI DM, D2, DX, D4 and DR1 LED light kits as well as most other popular brands of aftermarket lights. Existing bolt holes on the fairing stay are utilized without the need to drill, cut, weld or modify any components. The low profile design positions the lights close to the fairing for maximum visibility while also minimizing the risk of damage during a tip over or fall. Designed and engineered in the USA. Add the DENALI auxiliary light mount on your Africa Twin and enjoy the cleanest looking, easy to install & durable foundation for supporting your favourite Denali lights!
Features:
Robust laser cut steel construction
Attractive & durable powder coated finish
Bolt on installation does not require drilling, cutting or other modifications
Utilizes existing fairing stay mounting locations for fitment
Allows fitment of any DENALI DM, D2, DX, D4 & DR1 LED light kit
Compatible with most brands of auxiliary lights
M8 sized light mounting hole
Provides a very clean & factory looking installation
Low profile design positions the lights close to the fairing to minimize damage in a tip over or fall
Proudly designed & engineered in the USA
Two piece mount makes installation simplesuitable for: Honda Africa Twin CRF 1100 L Adventure Sports Models from 2020- onwards. (Only for Adventure Sports Models)Please Note: No lights are included with this kit, Mounting Bracket ONLY. Denali Lights available separately.
DENALI 2.0 Plug-n-Play CANsmart Controller for Honda CRF 1100 L 2020-
€371.90*
CANsmart™ Controller GEN II - Honda CRF 1100 L 2020-
Plug-n-Play with the Denali CANsmart Controller and always be covered with the Denali 5-year vs the average 2-year from competitor brands!
Harness the flexibility and intelligence of your Honda Africa Twin CRF1100L '20-'21 electrical system to make installation of accessories drastically easier with the DENALI CANsmart™ Controller. The CANsmart provides for plug-and-play installation of up to four electrical accessories, all controlled through your BMW's existing handlebar switches. No more "tacked on" switches or confounding wire routing. In addition, because the CANsmart controls the power distribution functions, there's no need to wire in bulky relays to control your accessories.
The CANsmart's four dedicated circuits are pre-programmed to connect to and independently control two sets of auxiliary lights, an auxiliary horn, and an auxiliary brake light. Each accessory circuit is electronically fused and ready to use right out of the box. Free software (for Mac or PC) allows you to customize these circuits, but the default settings will be right for the vast majority of installations.
It also features a "flash to pass" and "strobe when horn active" setting that will strobe the auxiliary lights when you pulse your high beam switch or sound your horn. The feature-rich brake light circuit will transform a simple two-wire brake light into a smart brake light complete with running light, multiple flash pattern, and deceleration activated braking functionality. The horn circuit enables the addition of an auxiliary horn without having to add a relay and dedicated horn wiring harness.
Want more flexibility? We thought you might. You can set any of the four circuits to Simple Circuit Mode, which will disable all custom circuit settings to provide a clean switched 12V circuit to power an accessory of your choice. The electronic fuse is the only active setting so you can properly fuse your accessory.
Features:
True Plug & Play installation
New firmware allows full dimming control of two-wire circuits, including any brand of driving light
Offers custom control of your electrical accessories
4 dedicated circuits pre-programmed to control two sets of auxiliary lights, an auxiliary horn, & an auxiliary brake light
Each circuit is electronically fused and preconfigured to use right out of the box
Features dozens of customizable settings that can be controlled with CANsmart Accessory Manager Software
Flash to pass & strobe when horn active can strobe your auxiliary lights when you pulse the high beam or sound your horn
Compatible with the DENALI B6 Auxiliary Brake Light for integrated running light, multiple flash pattern, deceleration & activated braking functionality
Permits use of auxiliary horn like the DENALI SoundBomb without having to add a relay or dedicated horn wiring harness
What's in the box:
CANsmart Controller
(2) 4ft light extension cables
5ft SoundBomb horn extension cable
Brake light pigtail
Zip-ties
Adhesive hook-and-loop fastener
Micro USB programing cable
Tip
DENALI Slip-On Blackout Cover Kit for D4 LED Lights
€19.90*
DENALI Slip-On Blackout Covers keep your bike street legal in states that require aftermarket lighting to be covered on public roads. Once you get to the trails, slip the covers off of your DENALI D4 lights and go.
The rugged silicone construction of the Slip-On Covers protects from rocks and other debris, providing an even longer lifespan to your DENALI D4 lights.
SoundBomb Horn Mounting Bracket for select Harley Davidson Motorcycles
€53.90*
This vehicle-specific horn mount allows you to mount the DENALI SoundBomb Original Dual-Tone Air Horn in the optimum location on your motorcycle. This kit includes a beefy powder-coated steel bracket with an M8 mounting hole and all necessary mounting hardware.Vehicle Fitment
Harley-Davidson Sportster Iron 883 (XL883N) 1984-2020
Harley-Davidson SuperLow (XL883L) 1986-2020
Harley-Davidson SuperLow 1200T (XL1200T) 2003-2017
Harley-Davidson Touring Models 1984-1999
SoundBomb Horn Mounting Bracket BMW R 1200 GS 2013-2016
€36.90*
This vehicle-specific horn mount allows you to mount the DENALI SoundBomb Original Dual-Tone Air Horn in the optimum location on your motorcycle. This kit includes a beefy powder-coated steel bracket with an M8 mounting hole and all necessary mounting hardware.
SoundBomb Horn Mounting Bracket BMW K1600 GT 2011- / K 1600 B 2018- / K1600 Grand America 2018-
€31.90*
This vehicle-specific horn mount allows you to mount the DENALI SoundBomb Original Dual-Tone Air Horn in the optimum location on your motorcycle. This kit includes a beefy powder-coated steel bracket with an M8 mounting hole and all necessary mounting hardware.Vehicle Fitment
BMW K1600GT 2011-2021
BMW K1600GTL 2011-2021
BMW K1600GTL Exclusive 2014-2017
BMW K1600B 2018-2021
BMW K1600 Grand America 2018-2021
DENALI License Plate Mount For T3 Signal Pods
€79.90*
These low-profile steel mounting brackets allow you to mount rear T3 Signal Pods to the side of your license plate. Adding additional brake and turn lighting to the sides of your plate expands your lighting footprint giving you significantly more visibility over traditional single-piece light bars that mount below your plate.What's In the Box?
(x2) License Plate Mounting Brackets
(x1) M6 Hardware Kit
Denali Auxiliary Light Mount For Triumph Tiger 800 2010-2015
€72.90*
Laser-cut from mild steel and powder coated black, this light mounting bracket is both strong and attractive.
The kit allows fitment of any Denali LED Lighting Kit (not included) to the Triumph Tiger 800 '10-'15, Tiger 800XC '10-'15, Tiger 800XCX, Tiger 800XR & Tiger 800XRX models, installing the Denali lights neatly underneath the main headlights.
All mounting hardware and instructions are included.
Please Note: No lights are included with this kit, Mounting Bracket ONLY. Denali Lights are available separately.Please Note: No lights are included with this kit, Mounting Bracket ONLY. Denali Lights available separately.
DENALI SoundBomb Horn Wiring Adapter for Hex EzCAN
€31.90*
Use the DENALI SoundBomb Horn Adapter wiring kit for connecting SoundBomb horns to the HEX EzCAN Accessory Manager for a true plug & play connection. This harness is pre-terminated at one end with angled spade terminals and sheathed in a durable sleeve to prevent chafing and make your wiring job look cleaner. Simply use the included Posi-Locks to connect the wiring adapter to connector pigtails included with the HEX EzCAN Accessory Manager, route the wires, and plug in your SoundBomb Horn and you are good to go!Includes:
DENALI SoundBomb to Hex EzCAN Wiring Adapter (4ft Length)
2 Posi-Lock ConnectorsNote: Works only with first-generation HEX ezCAN products with two-wire horn connectors.
Tip
Denali Auxiliary Light Mount For BMW R 1250 GS Adventure 2019-
€167.90*
This Denali Mount Kits allow you to mount any Denali lights on your BMW R 1250 GS Adventure 2019- with ease, the laser-cut mild steel powder coated black bracket is both strong and attractive.
This kit allows fitment of any Denali LED Lights.What's in the Box:
Denali Lighting LED mounting bracket
Installation instructions
Mounting HardwarePlease Note: No lights are included with this kit, Mounting Bracket ONLY. Denali Lights available separately.
Denali Auxiliary Light Mount For BMW R 1200 GS LC '13-'18 & R1250 GS '18-
€105.90*
This Denali Mount Kits allow you to mount any Denali lights on your BMW R1200GS LC '13-'18 & R1250GS '18- with ease, the laser-cut mild steel powder coated black bracket is both strong and attractive.
This kit allows fitment of any Denali LED Lights.Please Note: No lights are included with this kit, Mounting Bracket ONLY. Denali Lights available separately.
Erleben Sie Denali Beleuchtung und Sicherheitshupen
Die Denali Beleuchtung und Sound Bomb Hupen bieten eine ultimative Kombination aus Sichtbarkeit und akustischer Präsenz. Unsere Produkte sorgen nicht nur für helles Licht, sondern auch für einen durchdringenden Ton, der in jeder Situation wahrgenommen wird.
Von robusten Hauptscheinwerfern bis zu kompakten Denali Pods, unsere Beleuchtungssysteme sind auf maximale Leistung ausgelegt. Ergänzen Sie Ihr Sicherheitssetup mit dem Smart Controller für einfache Steuerung und Integration.
Unsere Kabelsätze und Hupe-Befestigungen wurden entwickelt, um die Montage und Anpassung an Ihr Motorrad zu erleichtern. Für optimalen Schutz sorgen Denali Abdeckungen und Linsen-Sets, die sich ideal mit Ihren bestehenden Komponenten integrieren lassen.
Die innovative Technologie von Denali, einschließlich DialDim Controller und Schalter-Controller, ermöglicht Ihnen, die Kontrolle in der Hand zu behalten und die Sicherheit auf ein neues Level zu heben. Vertrauen Sie auf Denali, um bei jeder Fahrt sichtbar und sicher zu sein.