Denali Scheinwerfer

The Denali D3 LED lights are built upon a decade of DENALI innovation to deliver the highest performing street-legal fog light to hit the market. Their proprietary fog optics were painstakingly engineered to reach the maximum allowable candela (beam distance) for each of the regulated lighting zones for both the North American SAE/DOT and European Union ECE regulations! The result is a truly unique lens that performs as well as it looks, capable of generating a super-crisp fog beam that is 450 feet long by 350 feet wide at 1 lux (per pair)! No other street-legal fog light even comes close!  The D3 is also available in our signature TriOptic™ beam system that provides a spot and hybrid beam option (in the same kit) for drivers wanting uncompromised light output when you need it most. Features Best in class street-legal fog beam (SAE/DOT & ECE certified)  High-Intensity Series Cree LEDs outputting 2800 lumens per pod  DataDim™ 3-wire smart-dimming technology (compatible with all DENALI dimming controllers)  DrySeal™ Submersible Waterproof light can withstand the most extreme environments  Impact PC™ Polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels.  LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating  Low profile mounting bracket with stainless steel hardware included    Beam Performance (pair)  Beam Distance (at 1 lux): 450 feet (137 meters)  Beam Width (at 1 lux): 300 feet (91 meters)    Specs (single pod)   Pod Size: 3.5" (90mm) Round x 3.0" (76mm) Deep LED: (4x) 11 Watt Cree XP-P LEDs  Power Draw: 40 Watts (3.3 Amps) Lumens: 2800 DataDim™ Compatible: Yes  Operating Voltage: 9-32V DC  IP67 Waterproof & Submersible Fog Lens Certifications: SAE/DOT J583 & ECE R19 What’s in the Box? (1x) D3 LED Fog Light Pod  (1x) Hinge Mounts with M8 Stainless Steel Hardware  (1x) Wiring Pigtail

Denali's new D3 LED lights are built upon a decade of DENALI innovation to deliver the highest performing 36-watt street-legal driving light to hit the market. Their D3 driving light features our signature TriOptic™ beam system that includes a spot and hybrid driving lens with each light pod. Unlike previous TriOptic™ lights, the D3 hybrid driving beam is ECE and SAE compliant to deliver an impressive street-legal high beam in North America and European Union countries. But what if you're not concerned with street-legal precision and just want off-road outrageous? We got you covered too! The D3 spot lens was engineered for maximum beam distance measuring over 1900 feet at 1 lux (per pair). No other 36-watt light even comes close. The spot beam is so impressive it actually outperforms top-tier competitor's lights that are twice its size.    Features:  TriOptic™ Lens System (includes spot and hybrid lenses with each pod)  Best in class street-legal spot and hybrid beams (SAE/DOT & ECE certified)  High-Intensity Series Cree LEDs outputting 2100 lumens per pod  DataDim™ 3-wire smart-dimming technology (compatible with all DENALI dimming controllers)  DrySeal™ Submersible Waterproof light can withstand the most extreme environments  Impact PC™ Polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels.  LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating  Low profile mounting bracket with stainless steel hardware included  Additional SAE/DOT & ECE certified hybrid driving lens included (spot lens installed)  Amber & Selective Yellow lenses available (sold separately)  Specs (single pod): Pod Size: 3.5" (90mm) Round x 2.62" (66mm) Deep LED: (3x) 11 Watt Cree XP-P LEDs  Power Draw: 36 Watts (3 Amps) Lumens: 2100 DataDim™ Compatible: Yes  Operating Voltage: 9-32V DC  IP67 Waterproof & Submersible Hybrid Lens Certifications: SAE/DOT J581 & ECE R112 Spot Lens Certifications: ECE R112    Beam Performance (pair): Spot Beam Beam Distance (at 1 lux): 1910 feet (582 meters)  Beam Width (at 1 lux): 100 feet (30 meters)  Combo Beam (1 spot, 1 hybrid): Beam Distance (at 1 lux): 1520 feet (463 meters) Beam Width (at 1 lux): 175 feet (53 meters) Hybrid Beam (EU certified lens): Beam Distance (at 1 lux): 1050 feet (320 meters)  Beam Width (at 1 lux): 225 feet (69 meters) What’s in the Box? (1x) D3 LED Light Pod (spot lens installed) (1x) D3 Hybrid Lens  (1x) Hinge Mounts with M8 Stainless Steel Hardware  (1x) Wiring PigtailPlease note: The Hybrid lens (included in this kit) Is the only EU-certified lens for this kit. 

At over 15,000 lumens, the DENALI D7 light kit is one of the brightest LED lights under 4.5 inches period. A pair of D7s feature 14 high-intensity, 10-watt LEDs that are focused through a proprietary single-piece optic specifically engineered to create a full bodied spot beam that can reach over 1500ft at an intensity of 1.0 lux. A pair of D7s will outshine 14 D2 lights and produces more than twice the light output of the D4. Not only are the new D7s incredibly bright, but they're strong, too. The robust heatsink and Active Thermal Management work together to keep this high-powered lamp cool enough to maintain maximum light output when you need it most. Because the new D7 has so much power, there's no need for a selection of optics. The standard optic set benefits from the raw power of this array to have best-in-class spot coverage at a distance, perfect for picking out wildlife way beyond the range of your motorcycle's normal high beam. With lumens to spare, the D7's optics were designed to preserve a near-flood-beam pattern, resulting in an amazingly wide (200ft) beam that helps illuminate the sides of the road. In a way, the combination of incredible intensity and optics that are neither too distance-focused or flood-oriented is the best of both worlds. In other ways, the D7 lights follow DENALI's reputation for innovative features. The D7 features DENALI’s DataDim™ Technology, which enables the lights to be upgraded in seconds to dual intensity by connecting a plug-n-play DataDim™ Controller that will automatically switch the lights between half and full intensity with your vehicle's original high beam switch. E-Mark Approval Number: E9*112R01/08*22253*00Features: Comprehensive LED light kit specifically designed for powersports applications High-Intensity Series Cree LEDs outputting 2190 lumens per kit DataDim™ equipped light pods and harness allow plug-n-play connection to the DataDim™ dimming controller Premium powersports harness with waterproof switch and handlebar switch mount included Plug-and-play installation. No wire cutting or splicing required. DrySeal™ Submersible Waterproof light and switch housings can withstand the most extreme environments Impact PC™ Polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels. LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating Low profile mounting bracket with stainless-steel hardware included Specifications: LEDs: (14) 10 Watt Cree XPL HI Power Draw: 10 Amps Beam Distance: 1505ft Beam Width: 200ft Raw Lumens: 15330 Intensity: Single Intensity Harness DataDim™ Compatible: Yes Operating Voltage: 12 VDC Pod Size: 4.4in Round x 3.9in Deep IP67 Waterproof & Submersible E Mark Approved Spot LensesWhat's in the Box? (1) LED light pod (1) Hinge mount with M8 stainless-steel hardware (1) 4in wiring pigtail (2) Zip ties & (1) adhesive mounting square

At over 15,000 lumens, the DENALI D7 light kit is one of the brightest LED lights under 4.5 inches period. A pair of D7s feature 14 high-intensity, 10-watt LEDs that are focused through a proprietary single-piece optic specifically engineered to create a full bodied spot beam that can reach over 1500ft at an intensity of 1.0 lux. A pair of D7s will outshine 14 D2 lights and produces more than twice the light output of the D4. Not only are the new D7s incredibly bright, but they're strong, too. The robust heatsink and Active Thermal Management work together to keep this high-powered lamp cool enough to maintain maximum light output when you need it most. Because the new D7 has so much power, there's no need for a selection of optics. The standard optic set benefits from the raw power of this array to have best-in-class spot coverage at a distance, perfect for picking out wildlife way beyond the range of your motorcycle's normal high beam. With lumens to spare, the D7's optics were designed to preserve a near-flood-beam pattern, resulting in an amazingly wide (200ft) beam that helps illuminate the sides of the road. In a way, the combination of incredible intensity and optics that are neither too distance-focused or flood-oriented is the best of both worlds. In other ways, the D7 lights follow DENALI's reputation for innovative features. The D7 features DENALI’s DataDim™ Technology, which enables the lights to be upgraded in seconds to dual intensity by connecting a plug-n-play DataDim™ Controller that will automatically switch the lights between half and full intensity with your vehicle's original high beam switch. E-Mark Approval Number: E9*112R01/08*22253*00Features: Comprehensive LED light kit specifically designed for powersports applications High-Intensity Series Cree LEDs outputting 2190 lumens per kit DataDim™ equipped light pods and harness allow plug-n-play connection to the DataDim™ dimming controller Premium powersports harness with waterproof switch and handlebar switch mount included Plug-and-play installation. No wire cutting or splicing required. DrySeal™ Submersible Waterproof light and switch housings can withstand the most extreme environments Impact PC™ Polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels. LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating Low profile mounting bracket with stainless-steel hardware included Specifications: LEDs: (14) 10 Watt Cree XPL HI Power Draw: 10 Amps Beam Distance: 1505ft Beam Width: 200ft Raw Lumens: 15330 Intensity: Single Intensity Harness DataDim™ Compatible: Yes Operating Voltage: 12 VDC Pod Size: 4.4in Round x 3.9in Deep IP67 Waterproof & Submersible E Mark Approved Spot LensesWhat's in the Box? (2) LED Light Pods (1) HotSwap™ Single Intensity Wiring Harness (1) DrySeal Waterproof Illuminated Switch (1) 7/8in Handlebar Switch Mount (1) 1.0in Handlebar Switch Mount (2) Hinge Mounts with M8 Stainless Steel Hardware (4) Zip Ties & (1) Adhesive Mounting Square

Denali 2.0 Light Kits are brighter, more robust, and a lot more versatile. The all new Cree High-Intensity 10 watt LED's are focused through our TriOptic Lens System to give you three unique beam patterns in one kit. Equipped with DataDim Technology and a modular HotSwap wiring harness, the lights can be upgraded in seconds to switch between half and full intensity with your vehicle's original high beam switch. Our DrySeal submersible waterproof construction and Impact PC Bezels create super durable light and switch housings that can withstand the most extreme environments without giving up. E-Mark Approval Number: AR-E9-00.16142.DENALI 2.0 Features HiDrive High-Intensity Cree LED's TriOptic Multi-Beam Lens System DataDim LED Dimming Technology HotSwap Modular Wiring Harness System DrySeal Submersible Waterproof Illuminated Switch DrySeal Submersible Waterproof Light Housings Impact PC Corrosion-Proof Bezels LiveActive Intelligent Thermal Management Chrome Plated Optic Holders Low-Profile Mount with Stainless Steel Hardware Handlebar Switch Mounts Included E Mark Lenses Included Features Explained: HiDrive High-Intensity 10 Watt LED's: 2.0 lights feature the latest development from Cree; a new Hi-Intensity LED chip that features a redesigned primary optic to maximize light output through secondary optics. The 2.0 series LEDs are more efficient; producing more lumens and 15% more light output without increasing power draw. TriOptic Multi-Beam Lens System: 2.0 Light kits include two spot lenses and two elliptical flood lenses giving you three unique beam patterns in one kit. Use two spots for maximum distance, two elliptical floods for maximum spread, or one of each for the best of both worlds. Data Dim LED Dimming Technology: All 2.0 light pods are equipped with a dedicated 3rd-wire dimming circuit so we can use an external signal to reliably control the intensity of the LED chip at the source. Plug in our DataDim Controller (sold separately) to enable the DENALI lights to switch between half and full intensity with your vehicle's original high beam switch. Data-Dimming eliminates unnecessary modulation of the entire circuit which is unavoidable using basic two-wire dimming. HotSwap Modular Wiring Harness System: Our premium wiring harness features high-quality waterproof components and our clever HotSwap design that enables an effortless swap from the standard single-intensity relay to our dual-intensity DataDim controller (sold separately). DrySeal Submersible Waterproof Illuminated Switch: Our beefy, completely sealed, waterproof switch was engineered from the ground up to withstand harsh out-door abuse on powersports vehicles. It's clever design can be either flush or bar mounted. DrySeal Submersible Waterproof Light Housings: In addition to molded silicone gasket seals, we use a unique DrySeal construction technique that encases the wires in a potted cavity as they enter the housing. This ensures our housings are 100% watertight even when submerged underwater with the wires cut and connector removed. Impact PC Corrosion-Proof Bezels: Our Impact PC bezels are molded in 100% polycarbonate to create an impenetrable surface that won't rust, fade, or corrode even after taking repeated impacts from rocks and debris. LiveActive Intelligent Thermal Management: DENALI 2.0 lights feature cutting edge LED drivers that work with our uncompromising heatsinks to manage heat levels in real time. This duo works together to ensure that our lights stay cool enough to maintain the maximum light output when you need it most. Chrome Plated Optic Holders: We take the extra step to chrome plate our optic holders to maximize reflectivity and refine the appearance match the original chrome reflectors of your vehicle headlights. Low-Profile Mount with Stainless Steel Hardware: DENALI 2.0 light pods include a robust, low-profile hinge mount and stainless steel M8 mounting hardware. The low-profile hinge creates a super clean installation while maintaining maximum strength. Handlebar Switch Mount Included: Our versatile switch design can be either flush, perch, or bar mounted to your vehicle. DENALI 2.0 light kits include a handlebar mount to provide an integrated mounting location for the light switch right out of the box. E Mark Approved Lenses DENALI 2.0 kits include E Mark approved lenses DM Kit Product Specs (Compact Conspicuity): LED's: (2x) 10 Watt Cree XPL HI Power Draw: 1.6 Amps Beam Distance (Spot): 395 Feet Beam Width (Spot): 55 Feet Raw Lumens: 2190 Intensity: Single Intensity Harness DataDim Compatible: Yes Operating Voltage: 12 VDC Pod Size: 1.7" Round x 2.4" DeepDM Kit Contents: (2x) LED Light Pods (2x) Spot Lenses (Installed) (2x) E Mark Approved Elliptical Flood Lenses (Included) (1x) HotSwap Single Intensity Wiring Harness (1x) DrySeal Waterproof Illuminated Switch (1x) 7/8" inch Handlebar Switch Mount (1x) 1-inch Handlebar Switch Mount (2x) Hinge Mounts with M8 Stainless Steel Hardware (4x) Zip Ties & (1x) Adhesive Mounting Square

Denali 2.0 Light Kits are brighter, more robust, and a lot more versatile. The all new Cree High-Intensity 10 watt LED's are focused through our TriOptic Lens System to give you three unique beam patterns in one kit. Equipped with DataDim Technology and a modular HotSwap wiring harness, the lights can be upgraded in seconds to switch between half and full intensity with your vehicle's original high beam switch. Our DrySeal submersible waterproof construction and Impact PC Bezels create super durable light and switch housings that can withstand the most extreme environments without giving up. E-Mark Approval Number: R-PL-E9-01.16447.DENALI 2.0 Features HiDrive High-Intensity Cree LED's TriOptic Multi-Beam Lens System DataDim LED Dimming Technology HotSwap Modular Wiring Harness System DrySeal Submersible Waterproof Illuminated Switch DrySeal Submersible Waterproof Light Housings Impact PC Corrosion-Proof Bezels LiveActive Intelligent Thermal Management Chrome Plated Optic Holders Low-Profile Mount with Stainless Steel Hardware Handlebar Switch Mounts Included E Mark Lenses Included Features Explained: HiDrive High-Intensity 10 Watt LED's: 2.0 lights feature the latest development from Cree; a new Hi-Intensity LED chip that features a redesigned primary optic to maximize light output through secondary optics. The 2.0 series LEDs are more efficient; producing more lumens and 15% more light output without increasing power draw. TriOptic Multi-Beam Lens System: 2.0 Light kits include two spot lenses and two elliptical flood lenses giving you three unique beam patterns in one kit. Use two spots for maximum distance, two elliptical floods for maximum spread, or one of each for the best of both worlds. Data Dim LED Dimming Technology: All 2.0 light pods are equipped with a dedicated 3rd-wire dimming circuit so we can use an external signal to reliably control the intensity of the LED chip at the source. Plug in our DataDim Controller (sold separately) to enable the DENALI lights to switch between half and full intensity with your vehicle's original high beam switch. Data-Dimming eliminates unnecessary modulation of the entire circuit which is unavoidable using basic two-wire dimming. HotSwap Modular Wiring Harness System: Our premium wiring harness features high-quality waterproof components and our clever HotSwap design that enables an effortless swap from the standard single-intensity relay to our dual-intensity DataDim controller (sold separately). DrySeal Submersible Waterproof Illuminated Switch: Our beefy, completely sealed, waterproof switch was engineered from the ground up to withstand harsh out-door abuse on powersports vehicles. It's clever design can be either flush or bar mounted. DrySeal Submersible Waterproof Light Housings: In addition to molded silicone gasket seals, we use a unique DrySeal construction technique that encases the wires in a potted cavity as they enter the housing. This ensures our housings are 100% watertight even when submerged underwater with the wires cut and connector removed. Impact PC Corrosion-Proof Bezels: Our Impact PC bezels are molded in 100% polycarbonate to create an impenetrable surface that won't rust, fade, or corrode even after taking repeated impacts from rocks and debris. LiveActive Intelligent Thermal Management: DENALI 2.0 lights feature cutting edge LED drivers that work with our uncompromising heatsinks to manage heat levels in real time. This duo works together to ensure that our lights stay cool enough to maintain the maximum light output when you need it most. Chrome Plated Optic Holders: We take the extra step to chrome plate our optic holders to maximize reflectivity and refine the appearance match the original chrome reflectors of your vehicle headlights. Low-Profile Mount with Stainless Steel Hardware: DENALI 2.0 light pods include a robust, low-profile hinge mount and stainless steel M8 mounting hardware. The low-profile hinge creates a super clean installation while maintaining maximum strength. Handlebar Switch Mount Included: Our versatile switch design can be either flush, perch, or bar mounted to your vehicle. DENALI 2.0 light kits include a handlebar mount to provide an integrated mounting location for the light switch right out of the box. E Mark Approved Lenses DENALI 2.0 kits include E Mark approved lenses LED's: (8x) 10 Watt Cree XPL HI Power Draw: 6.6 Amps Beam Distance (Spot): 800 Feet Beam Width (Spot): 110 Feet Raw Lumens: 8760 Intensity: Single Intensity Harness DataDim Compatible: Yes Operating Voltage: 12 VDC Pod Size: 3.9" Square x 2.6" DeepD4 Kit Contents: (2x) LED Light Pods (2x) True-Hybrid Lenses (Installed) (2x) E Mark Approved Spot Lenses (included) (1x) HotSwap Single Intensity Wiring Harness (1x) DrySeal Waterproof Illuminated Switch (1x) 7/8" inch Handlebar Switch Mount (1x) 1 inch Handlebar Switch Mount (2x) Hinge Mounts with M8 Stainless Steel Hardware (4x) Zip Ties & (1x) Adhesive Mounting Square

DENALI 2.0 D4 LED Light Pod with DataDim Technology (Single) (DENDNL.D4.050) The DENALI D4 Pods were engineered from the ground up to create the brightest, most efficient, and most durable LED lights. Specifically designed for powersports applications, we focused on generating the most amount of light with the least amount of power draw from your vehicle. E-Mark Approval Number: R-PL-E9-01.16447.What's In The Box? (x1) DENALI D4 2.0 LED POD (x1) M8 Mounting Hardware Kit (x1) Clear D4 True-Hybrid Lens (x1) Wiring Pigtail

DENALI 2.0 DR1 LED Light Pod with DataDim Technology (Single) (DENDNL.DR1.050) The DENALI DR1 Pods were engineered from the ground up to create the brightest, most efficient, and most durable LED lights. Specifically designed for powersports applications, we focused on generating the most amount of light with the least amount of power draw from your vehicle. E-Mark Approval Number: R-PL-E9-01.16446.What's In The Box? (x1) DENALI DR1 2.0 LED POD (x1) M8 Mounting Hardware Kit (x1) Clear DR1 True-Hybrid Lens (x1) Wiring Pigtail

Denali 2.0 Light Kits are brighter, more robust, and a lot more versatile. The all new Cree High-Intensity 10 watt LED's are focused through our TriOptic Lens System to give you three unique beam patterns in one kit. Equipped with DataDim Technology and a modular HotSwap wiring harness, the lights can be upgraded in seconds to switch between half and full intensity with your vehicle's original high beam switch. Our DrySeal submersible waterproof construction and Impact PC Bezels create super durable light and switch housings that can withstand the most extreme environments without giving up. E-Mark Approval Number: R-PL-E9-01.16446.DENALI 2.0 Features HiDrive High-Intensity Cree LED's TriOptic Multi-Beam Lens System DataDim LED Dimming Technology HotSwap Modular Wiring Harness System DrySeal Submersible Waterproof Illuminated Switch DrySeal Submersible Waterproof Light Housings Impact PC Corrosion-Proof Bezels LiveActive Intelligent Thermal Management Chrome Plated Optic Holders Low-Profile Mount with Stainless Steel Hardware Handlebar Switch Mounts Included E Mark Lenses Included Features Explained: HiDrive High-Intensity 10 Watt LED's: 2.0 lights feature the latest development from Cree; a new Hi-Intensity LED chip that features a redesigned primary optic to maximize light output through secondary optics. The 2.0 series LEDs are more efficient; producing more lumens and 15% more light output without increasing power draw. TriOptic Multi-Beam Lens System: 2.0 Light kits include two spot lenses and two elliptical flood lenses giving you three unique beam patterns in one kit. Use two spots for maximum distance, two elliptical floods for maximum spread, or one of each for the best of both worlds. Data Dim LED Dimming Technology: All 2.0 light pods are equipped with a dedicated 3rd-wire dimming circuit so we can use an external signal to reliably control the intensity of the LED chip at the source. Plug in our DataDim Controller (sold separately) to enable the DENALI lights to switch between half and full intensity with your vehicle's original high beam switch. Data-Dimming eliminates unnecessary modulation of the entire circuit which is unavoidable using basic two-wire dimming. HotSwap Modular Wiring Harness System: Our premium wiring harness features high-quality waterproof components and our clever HotSwap design that enables an effortless swap from the standard single-intensity relay to our dual-intensity DataDim controller (sold separately). DrySeal Submersible Waterproof Illuminated Switch: Our beefy, completely sealed, waterproof switch was engineered from the ground up to withstand harsh out-door abuse on powersports vehicles. It's clever design can be either flush or bar mounted. DrySeal Submersible Waterproof Light Housings: In addition to molded silicone gasket seals, we use a unique DrySeal construction technique that encases the wires in a potted cavity as they enter the housing. This ensures our housings are 100% watertight even when submerged underwater with the wires cut and connector removed. Impact PC Corrosion-Proof Bezels: Our Impact PC bezels are molded in 100% polycarbonate to create an impenetrable surface that won't rust, fade, or corrode even after taking repeated impacts from rocks and debris. LiveActive Intelligent Thermal Management: DENALI 2.0 lights feature cutting edge LED drivers that work with our uncompromising heatsinks to manage heat levels in real time. This duo works together to ensure that our lights stay cool enough to maintain the maximum light output when you need it most. Chrome Plated Optic Holders: We take the extra step to chrome plate our optic holders to maximize reflectivity and refine the appearance match the original chrome reflectors of your vehicle headlights. Low-Profile Mount with Stainless Steel Hardware: DENALI 2.0 light pods include a robust, low-profile hinge mount and stainless steel M8 mounting hardware. The low-profile hinge creates a super clean installation while maintaining maximum strength. Handlebar Switch Mount Included: Our versatile switch design can be either flush, perch, or bar mounted to your vehicle. DENALI 2.0 light kits include a handlebar mount to provide an integrated mounting location for the light switch right out of the box. E Mark Approved Lenses DENALI 2.0 kits include E Mark approved lenses DM Kit Product Specs (Compact Conspicuity): LED's: (2x) 10 Watt Cree XPL HI Power Draw: 1.6 Amps Beam Distance (Spot): 1000 Feet Beam Width (Spot): 75 Feet Raw Lumens: 2190 Intensity: Single Intensity Harness DataDim Compatible: Yes Operating Voltage: 12 VDC Pod Size: 3.7" Round x 3.8" DeepDM Kit Contents: (2x) LED Light Pods (2x) Spot Lenses (Installed) (2x) E Mark Approved Elliptical Flood Lenses (Included) (1x) HotSwap Single Intensity Wiring Harness (1x) DrySeal Waterproof Illuminated Switch (1x) 7/8" inch Handlebar Switch Mount (1x) 1-inch Handlebar Switch Mount (2x) Hinge Mounts with M8 Stainless Steel Hardware (4x) Zip Ties & (1x) Adhesive Mounting Square

Denali 2.0 Light Kits are brighter, more robust, and a lot more versatile. The all new Cree High-Intensity 10 watt LED's are focused through our TriOptic Lens System to give you three unique beam patterns in one kit. Equipped with DataDim Technology and a modular HotSwap wiring harness, the lights can be upgraded in seconds to switch between half and full intensity with your vehicle's original high beam switch. Our DrySeal submersible waterproof construction and Impact PC Bezels create super durable light and switch housings that can withstand the most extreme environments without giving up.DENALI 2.0 Features HiDrive High-Intensity Cree LED's TriOptic Multi-Beam Lens System DataDim LED Dimming Technology HotSwap Modular Wiring Harness System DrySeal Submersible Waterproof Illuminated Switch DrySeal Submersible Waterproof Light Housings Impact PC Corrosion-Proof Bezels LiveActive Intelligent Thermal Management Chrome Plated Optic Holders Low-Profile Mount with Stainless Steel Hardware Handlebar Switch Mounts Included E Mark Lenses Included Features Explained: HiDrive High-Intensity 10 Watt LED's: 2.0 lights feature the latest development from Cree; a new Hi-Intensity LED chip that features a redesigned primary optic to maximize light output through secondary optics. The 2.0 series LEDs are more efficient; producing more lumens and 15% more light output without increasing power draw. TriOptic Multi-Beam Lens System: 2.0 Light kits include two spot lenses and two elliptical flood lenses giving you three unique beam patterns in one kit. Use two spots for maximum distance, two elliptical floods for maximum spread, or one of each for the best of both worlds. Data Dim LED Dimming Technology: All 2.0 light pods are equipped with a dedicated 3rd-wire dimming circuit so we can use an external signal to reliably control the intensity of the LED chip at the source. Plug in our DataDim Controller (sold separately) to enable the DENALI lights to switch between half and full intensity with your vehicle's original high beam switch. Data-Dimming eliminates unnecessary modulation of the entire circuit which is unavoidable using basic two-wire dimming. HotSwap Modular Wiring Harness System: Our premium wiring harness features high-quality waterproof components and our clever HotSwap design that enables an effortless swap from the standard single-intensity relay to our dual-intensity DataDim controller (sold separately). DrySeal Submersible Waterproof Illuminated Switch: Our beefy, completely sealed, waterproof switch was engineered from the ground up to withstand harsh out-door abuse on powersports vehicles. It's clever design can be either flush or bar mounted. DrySeal Submersible Waterproof Light Housings: In addition to molded silicone gasket seals, we use a unique DrySeal construction technique that encases the wires in a potted cavity as they enter the housing. This ensures our housings are 100% watertight even when submerged underwater with the wires cut and connector removed. Impact PC Corrosion-Proof Bezels: Our Impact PC bezels are molded in 100% polycarbonate to create an impenetrable surface that won't rust, fade, or corrode even after taking repeated impacts from rocks and debris. LiveActive Intelligent Thermal Management: DENALI 2.0 lights feature cutting edge LED drivers that work with our uncompromising heatsinks to manage heat levels in real time. This duo works together to ensure that our lights stay cool enough to maintain the maximum light output when you need it most. Chrome Plated Optic Holders: We take the extra step to chrome plate our optic holders to maximize reflectivity and refine the appearance match the original chrome reflectors of your vehicle headlights. Low-Profile Mount with Stainless Steel Hardware: DENALI 2.0 light pods include a robust, low-profile hinge mount and stainless steel M8 mounting hardware. The low-profile hinge creates a super clean installation while maintaining maximum strength. Handlebar Switch Mount Included: Our versatile switch design can be either flush, perch, or bar mounted to your vehicle. DENALI 2.0 light kits include a handlebar mount to provide an integrated mounting location for the light switch right out of the box. E Mark Approved Lenses DENALI 2.0 kits include E Mark approved lenses D2 Kit Product Specs: LED's: (2x) 10 Watt Cree XPL HI Power Draw: 1.6 Amps Beam Distance (Spot): 525 Feet Beam Width (Spot): 75 Feet Raw Lumens: 2190 Intensity: Single Intensity Harness DataDim Compatible: Yes Operating Voltage: 12 VDC Pod Size: 2.2" Round x 2.4" Deep E-Mark Approval Number: AR-E9-00.16143D2 Kit Contents (2x) LED Light Pods (2x) Spot Lenses (Installed) (2x) E Mark Approved Elliptical Flood Lenses (Included) (1x) HotSwap Single Intensity Wiring Harness (1x) DrySeal Waterproof Illuminated Switch (1x) 7/8" inch Handlebar Switch Mount (1x) 1 inch Handlebar Switch Mount (2x) Hinge Mounts with M8 Stainless Steel Hardware (4x) Zip Ties & (1x) Adhesive Mounting Square

DENALI 2.0 DM LED Light Pod with DataDim Technology (Single) (DENDNL.DM.050) The DENALI DM Pods were engineered from the ground up to create the brightest, most efficient, and most durable LED lights. Specifically designed for powersports applications, we focused on generating the most amount of light with the least amount of power draw from your vehicle. E-Mark Approval Number: AR-E9-00.16142.What's In The Box? (x1) DENALI DM 2.0 LED POD (x1) M8 Mounting Hardware Kit (x1) Clear DM Flood Lens (x1) Wiring Pigtail

DENALI 2.0 D2 LED Light Pod with DataDim Technology (Single) (DENDNL.D2.050) The DENALI D2 Pods were engineered from the ground up to create the brightest, most efficient, and most durable LED lights. Specifically designed for Powersports applications, we focused on generating the most amount of light with the least amount of power draw from your vehicle. E-Mark Approval Number: AR-E9-00.16143What's In The Box? (x1) DENALI D2 2.0 LED POD (x1) M8 Mounting Hardware Kit (x1) Clear D2 Flood Lens (x1) Wiring Pigtail

We are thrilled to introduce the highest-performing, and most feature-rich 4-inch driving light ever released! Have you ever wondered what 23,000 lumens do to a dark landscape? It will blow your mind, and we haven't even started yet. Picture the most powerful driving light ever built, then add a flood beam, spot beam, and hybrid beam, a multi-colour DRL mode, two fully dimmable circuits, and the option to change the beam shape and beam colour on the fly. That's the D7 PRO, and it looks even better than it sounds. The D7 PRO features a split dual-circuit design that allows fully independent on/off and dim of a centre flood beam and outer spot beam. Use our revolutionary DialDim Switch or CANsmart Controller to effortlessly control all lighting functions from a single halo dimmer switch or the vehicle OEM handlebar controls. Add to that, our patent pending X-Lens system which allows you to change the centre flood or DRL beam colour to white, amber, or selective yellow on the fly giving riders more flexibility and functionality than ever before. Last but not least, the D7 PRO has a "DRL Boost Mode" which allows you to run the centre optics as a dim DRL or dial it up to 100% up to create a high-power flood beam. The innovative centre optics can also flash in sync with your turn signals when paired with the amber X-Lenses.D7 PRO Pod Features HiDrive LEDS 11,900 Lumens Per Pod - Seven 14-Watt LEDs combined with our proprietary TIR optics make this the brightest light under 4.5” ever released Dual-Beam Technology - Independent control (and dimming) of centre flood beam, outer spot beam, or all-on hybrid beam Modular Snap-On X-Lens - Enables customizable beam shape and colour on-the-fly. Interchange able centre flood beam colour in white, amber, or selective yellow DRL Boost Mode - Drive the center LEDs as a low-intensity DRL, or dial up the power to generate a massive high-intensity flood beam Integrated Turn Signal Mode - Run the centre flood optics as an amber DRL or flood light that will flash in sync with the vehicle turn signals CANsmart & DialDim Compatible - Control both circuits on a single DialDim switch or unlock over 20 features & settings using the CANsmart accessory manager D7 PRO Specs (Single Pod) LED's: (7x) 14 Watt Cree XML3 Power Draw: 98 Watts / 8 Amps Raw Lumens: 11,900 Spot Beam Distance: 1250 Feet (380 Meters) Flood Beam Width: 250 Feet (75 Meters) DataDim™ Compatible: Yes Operating Voltage: 9-32 VDC Pod Size: 4.4" Round x 2.9" Deep Pod Weight: 1.8 lbs IP68 & 69K Waterproof, Submersible, & High-pressure Spray E Mark Approved Spot Lens (ECE R112 Driving Beam)D7 PRO Product Bundles - What’s Included? D7 PRO Light Pod (DNL.D7P.050) includes: (1x) D7 PRO Light Pod (w/ mounting hardware) (3x) X-Lenses (Clear, Amber, & Selective Yellow) (1x) 2-into-1 Single-Circuit Wiring Adapter

This Daytime Running Light Kit is designed for fitting a pair of DENALI DRL pods to the side of any M6 hardware mounting point on your motorcycle for maximum visibility to oncoming traffic. These are ideal for tucking the DRLs up inside the fairing for an integrated factory look. Purpose built to create the most amount of light from the smallest, slimmest housing possible, the DENALI DRLs are unbelievably bright and compact. With an integrated dual intensity circuit, these lights can be wired to run at full intensity, half intensity or automatically switch between the two with your motorcycle's original high beam switch. A waterproof connector and posi-tap pigtail utilize power from your vehicles running light circuit, making installation a breeze and operation effortless; the DRLs will simply come on and turn off with your vehicle's ignition. Like emergency strobe lights, the DENALI DRL optics are designed to concentrate the light at the source as opposed to project it down the road. While ideal for daytime and nighttime conspicuity, these lights will also provide a noticeable spread of light immediately in front of your motorcycle at night. Available in white and amber.Features: Dual Circuit: 50% & 100% Intensity 180° viewing angle 12 Extremely bright LEDs Very efficient 12-watt total power consumption Low profile designWhat's in the box: (x2) DENALI DRL pods (x2) Offset Mounting brackets (x1) M6 Mounting hardware kit (x2) Wiring pigtail (x1) Wiring splitter (x3) Posi-taps

This Daytime Running Light Kit is designed to mount a pair of DENALI DRL pods on the front fender of your bike, creating maximum visibility to oncoming traffic. This kit directly replaces the original M5 or M6 fender hardware securing the DRL’s close to the fender for a sleek, low-profile installation. Purpose built to create the most amount of light from the smallest, slimmest housing possible, the DENALI DRLs integrate perfectly with the front end and are unbelievably bright. Complete with an integrated dual intensity circuit, the lights can be wired to run at full intensity, half intensity or automatically switch between the two with the motorcycle's original high beam switch. A waterproof connector and posi-tap pigtail utilize power from your vehicles running light circuit, making installation a breeze and operation effortless; the DRLs will simply come on and turn off with your vehicle's ignition. Like emergency strobe lights, the DENALI DRL optics are designed to concentrate the light at the source as opposed to project it down the road. While ideal for daytime and nighttime conspicuity, these lights will also provide a noticeable spread of light immediately in front of your motorcycle at night. Available in white and amber. Only for Offroad!Features: Dual Circuit: 50% & 100% intensity 180° viewing angle 12 Extremely bright LEDs Very efficient 12-watt total power consumption Low profile design Only for OffroadWhat's in the box: (x2) DENALI DRL pods (x2) Fender mounting brackets (x1) M5 & M6 Fender mounting hardware kit (x2) Wiring pigtail (x1) Wiring splitter (x3) Posi-taps