DENALI 2.0 D4 LED Light Pod with DataDim Technology (Single)

This DENALI SoundBomb Compact horn mount kit allows fitment of the horn to engine guards, crash bars, or any tube 21mm-29mm in diameter. The clamp has a unique octagonal inner profile that allows the mount to securely grip a wide range of tube diameters and includes a fully rotatable mounting shelf to create a super versatile and robust horn mounting solution.

2.0 CANsmart Plug-N-Play Controller for BMW R1200GS(A) LC/RT '14-'18; R1200RS/R '15-'18; R1200GSA '19-; R1250GS/RT/GSA/R/RS '19- GEN2. E-Mark Approval Number: E11*10R05/01*10262*00 We didn't want to make just another accessory controller, we wanted to make a smarter one. Harness the power and intelligence of your vehicle's CANbus electrical system. The DENALI CANsmart Controller provides plug-n-play installation of up to four accessories to enable dozens of customizable settings that can be controlled right from the BMW "WonderWheel" or the CANsmart Accessory Manager Software. The four dedicated circuits are pre-programmed to connect and independently control two sets of auxiliary lights, an auxiliary horn, and an auxiliary brake light. Each accessory circuit is electronically fused and ready to rock right out of the box. The two auxiliary light circuits enable independent adjustment of high and low beam brightness right from the vehicles "WonderWheel". It also features a "flash to pass" and "strobe when horn active" setting that will strobe the auxiliary lights when you pulse your high beam switch or sound your horn. The feature-rich brake light circuit will transform a simple 2-wire brake light into a "smart brake light" complete with running light, multiple flash pattern, and deceleration activated braking functionality. The horn circuit enables the addition of an auxiliary horn without having to add a relay and dedicated horn wiring harness. Simple Circuit Over-Ride Want more flexibility; we thought you might. You can set any of the four circuits to "Simple Circuit" Mode which will disable all custom circuit settings to provide a clean switched 12V circuit to power an accessory of your choice. Use this setting to power an alternative accessory in place of the dedicated DENALI accessory. The electronic fuse is the only active setting so you can properly fuse your accessory.

Denali SoundBOMB Mini 113dB Horn (DENTT-SB.10200.B) Producing an massive 113 decibels of sound, the SoundBomb is over twice as loud as a standard motorcycle horn! The Denali™ SoundBomb was designed for those who want to be heard, but still want to maintain a stylish look. Thanks to its compact design and blacked-out housing, the SoundBomb will practically disappear once installed. At 113 decibels, the distinct low-tone sound from the DENALI SoundBomb Mini is overtwice as loud as a typical 100 decibel disc horn. Designed to be a direct Plug & Play upgrade from your factory horn, requiring no additional relay or wiring harness. When stock isn't quite enough, be heard with the SoundBomb Mini.Compatible with all CANbus electrical systems. Specifications: Sound Output: 113 dB at 3 feet Current Draw: 5 Amp Dimensions: 3.25"(82mm) x 3.4"(86mm) x 2.5"(63mm) Stylish All Black Design CANbus compatible Included: Single Piece Electromagnetic Horn Fully illustrated installation instructionsPlease note - Certain newer BMWs have a single horn connector and require an additional connector. Please see product code DENDNL.WHS.10100 in our shop.

At over 15,000 lumens, the DENALI D7 light kit is one of the brightest LED lights under 4.5 inches period. A pair of D7s feature 14 high-intensity, 10-watt LEDs that are focused through a proprietary single-piece optic specifically engineered to create a full bodied spot beam that can reach over 1500ft at an intensity of 1.0 lux. A pair of D7s will outshine 14 D2 lights and produces more than twice the light output of the D4. Not only are the new D7s incredibly bright, but they're strong, too. The robust heatsink and Active Thermal Management work together to keep this high-powered lamp cool enough to maintain maximum light output when you need it most. Because the new D7 has so much power, there's no need for a selection of optics. The standard optic set benefits from the raw power of this array to have best-in-class spot coverage at a distance, perfect for picking out wildlife way beyond the range of your motorcycle's normal high beam. With lumens to spare, the D7's optics were designed to preserve a near-flood-beam pattern, resulting in an amazingly wide (200ft) beam that helps illuminate the sides of the road. In a way, the combination of incredible intensity and optics that are neither too distance-focused or flood-oriented is the best of both worlds. In other ways, the D7 lights follow DENALI's reputation for innovative features. The D7 features DENALI’s DataDim™ Technology, which enables the lights to be upgraded in seconds to dual intensity by connecting a plug-n-play DataDim™ Controller that will automatically switch the lights between half and full intensity with your vehicle's original high beam switch. E-Mark Approval Number: E9*112R01/08*22253*00Features: Comprehensive LED light kit specifically designed for powersports applications High-Intensity Series Cree LEDs outputting 2190 lumens per kit DataDim™ equipped light pods and harness allow plug-n-play connection to the DataDim™ dimming controller Premium powersports harness with waterproof switch and handlebar switch mount included Plug-and-play installation. No wire cutting or splicing required. DrySeal™ Submersible Waterproof light and switch housings can withstand the most extreme environments Impact PC™ Polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels. LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating Low profile mounting bracket with stainless-steel hardware included Specifications: LEDs: (14) 10 Watt Cree XPL HI Power Draw: 10 Amps Beam Distance: 1505ft Beam Width: 200ft Raw Lumens: 15330 Intensity: Single Intensity Harness DataDim™ Compatible: Yes Operating Voltage: 12 VDC Pod Size: 4.4in Round x 3.9in Deep IP67 Waterproof & Submersible E Mark Approved Spot LensesWhat's in the Box? (1) LED light pod (1) Hinge mount with M8 stainless-steel hardware (1) 4in wiring pigtail (2) Zip ties & (1) adhesive mounting square

At over 15,000 lumens, the DENALI D7 light kit is one of the brightest LED lights under 4.5 inches period. A pair of D7s feature 14 high-intensity, 10-watt LEDs that are focused through a proprietary single-piece optic specifically engineered to create a full bodied spot beam that can reach over 1500ft at an intensity of 1.0 lux. A pair of D7s will outshine 14 D2 lights and produces more than twice the light output of the D4. Not only are the new D7s incredibly bright, but they're strong, too. The robust heatsink and Active Thermal Management work together to keep this high-powered lamp cool enough to maintain maximum light output when you need it most. Because the new D7 has so much power, there's no need for a selection of optics. The standard optic set benefits from the raw power of this array to have best-in-class spot coverage at a distance, perfect for picking out wildlife way beyond the range of your motorcycle's normal high beam. With lumens to spare, the D7's optics were designed to preserve a near-flood-beam pattern, resulting in an amazingly wide (200ft) beam that helps illuminate the sides of the road. In a way, the combination of incredible intensity and optics that are neither too distance-focused or flood-oriented is the best of both worlds. In other ways, the D7 lights follow DENALI's reputation for innovative features. The D7 features DENALI’s DataDim™ Technology, which enables the lights to be upgraded in seconds to dual intensity by connecting a plug-n-play DataDim™ Controller that will automatically switch the lights between half and full intensity with your vehicle's original high beam switch. E-Mark Approval Number: E9*112R01/08*22253*00Features: Comprehensive LED light kit specifically designed for powersports applications High-Intensity Series Cree LEDs outputting 2190 lumens per kit DataDim™ equipped light pods and harness allow plug-n-play connection to the DataDim™ dimming controller Premium powersports harness with waterproof switch and handlebar switch mount included Plug-and-play installation. No wire cutting or splicing required. DrySeal™ Submersible Waterproof light and switch housings can withstand the most extreme environments Impact PC™ Polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels. LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating Low profile mounting bracket with stainless-steel hardware included Specifications: LEDs: (14) 10 Watt Cree XPL HI Power Draw: 10 Amps Beam Distance: 1505ft Beam Width: 200ft Raw Lumens: 15330 Intensity: Single Intensity Harness DataDim™ Compatible: Yes Operating Voltage: 12 VDC Pod Size: 4.4in Round x 3.9in Deep IP67 Waterproof & Submersible E Mark Approved Spot LensesWhat's in the Box? (2) LED Light Pods (1) HotSwap™ Single Intensity Wiring Harness (1) DrySeal Waterproof Illuminated Switch (1) 7/8in Handlebar Switch Mount (1) 1.0in Handlebar Switch Mount (2) Hinge Mounts with M8 Stainless Steel Hardware (4) Zip Ties & (1) Adhesive Mounting Square

Denali Split SoundBOMB 120dB Horn (DENTT-SB.10100.B) Following on from the hugely popular original Denali™ SoundBomb comes the Split SoundBomb. It features the same ear-splitting 120 decibels of sound, but in a much more fitment friendly package. The Denali™ SoundBomb was designed for those who want to be heard, but still want to maintain a stylish look. Thanks to its compact design and blacked-out housing, the Split SoundBomb will practically disappear once installed. The unique design of the Denali Split Dual-Tone SoundBomb horn allows the compressor to be fitted separately to the acoustic unit. This enables mounting on sports bikes (where space is very limited) and on other, smaller bikes where there is limited space to fit the original SoundBomb. The compressor can be mounted up to 3 feet from the acoustic unit, thanks to the hose included in the kit. This means you can tuck the compressor away in the fairing, while still allowing the acoustic unit to give out the full 120dB!Compatible with all CANbus electrical systems. Specifications: Operating voltage: 12V Sound Output: 120 dB at 3 feet Current Draw: 20 Amps Dimensions: Compressor: 4.5” x 2.9” x 3.0 inch Acoustic unit: 4.1” x 3.7” x 3.4 inch Stylish All Black Design CANbus compatible Included: Compressor Acoustic Unit 3ft Hose 12 volt, 30 amp relay Cable tiesPlease note - Certain newer BMWs have a single horn connector and require an additional connector. Please see product code DENDNL.WHS.10100 in our shop.

Denali Crashbar Light Mounts (Fits crashbars 21mm-29mm in diameter) These stylish clamps are machined from 6061-T6 Aluminum for strength and durability. The kit allows fitment of any Denali LED Lighting Kit to any tubular bar ranging from 21mm to 29mm in diameter. The bracket can be mounted in numerous positions allowing the light pods to be placed for optimal beam projection, while keeping the pods themselves protected.Kit Includes: 2x black anodized aluminum machined clamp Mounting HardwareCompatible with ALL Denali lights.