R&G Swingarm Protectors Ducati 899 / 959 Panigale / Aprilia RS - Tuono - Tuareg 660 / Yamaha YZF-R 125 / MT-125

BMC air filters are produced using a “Full Moulding” system that enables the characteristic red filter to be realised from a single mould with no welded joints thus avoiding easy breakage. The rubber used in BMC air fi ltering systems has a long life, is very durable and has optimum adhesion characteristics to all shapes of airboxes. The fi ltering element is composed of layers of special cotton gauze soaked with low viscosity oil for better fi ltration effi ciency without compromising air fl ow penetration. The element is covered with an epoxy coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity. BMC fi ltration systems give better performance to the engine, both in terms of power and torque without compromising reliability. BMC airfilters are washable and reusable by using the appropriate washing kit.suitable for: Aprilia RS 660 / Tuono 660 models from 2021- onwards. (Also called Race version for even more air flow)BMC Performance Air Filter are successfully used for example in the Endurance World Championship in the Superbike World Championship or of course in the Moto GP. Among the teams to drive it from success to success, including big names such as Yart, Aprilia Factory Team SBK or naturally factory Yamaha team Moto GP and many more .....

Eazi-Grip are pleased to announce a new addition to their Tank Grip range with the Eazi-Grip™ PRO Tank Traction Pad kits. A progression from the Eazi-Grip™ original Traction Dome Tank Grip; developed with top teams in the British Superbike Championship and made in the UK, the self-adhesive tank grips are covered in a unique textured finish that at just 1mm thickness, has a crisp, slim-line profile and will increase the rider’s grip on the bike; drastically reducing body movement when braking and cornering, reducing arm pump and enabling a more stable body position. The PRO Tank Traction Pad Kits are manufactured from pvc, a material that is extremely hard-wearing and durable, the textured pattern is designed for maximum grip, with minimum fatigue to rider clothing. Easy to fit, its high-strength adhesive backing ensures a highly durable product that will stay exactly where it is placed, as well as not affecting or damaging paintwork during removal or replacement. Each Tank Traction Pad kit is supplied with precision pre-cut adhesive pieces, designed to fit the intended bike. Kits are currently offered for well over 100 different bike models, with new applications released almost weekly. EAZI Grip also offers a Universal Kit for bikes not currently provided for, or for bespoke tanks and project bikes. All kits are available in a clear finish, to blend into the bike’s paintwork or in black to stand out and contrast. The products are used by the top teams. Among them are, Quattro Plant Kawasaki, T3 Racing, Racing ILR or Chris Walker Racing.Advantages: Abrasion-proof surface Removable without damaging the finish Stabilizes the cornering performance as well as the braking and accelerating. delivery included: left and right side Color: black or clearsuitable for: Aprilia RS 660 / Tuono 660 models from 2021- onwards. (round recess for manufacturer logo in pad included)

R&G Race Series Engine Case Covers have been specifically developed in collaboration with selected high level BSB race teams and crash tested in BSB level racing events to ensure they meet and exceed all required standards for case protection. R&G Racing Engine Case Cover Skidder Testimonial In addition to the existing R&G Engine Case Cover range comes R&G's *NEW* 2015-spec Race Series Engine Case Covers, specially developed at the request of race teams and riders alike. They include a replaceable puck or slider on the impact face, giving the case not only more meat to grind through to further enhance the protection offered by a standard R&G Engine Case Cover but also offering an easy low-cost fix should you only have a "minor" slide, crash or drop. Engineered to allow just the "puck" to be replaced and your cover to be reused again and again! Crafted from 4mm polypropylene for strength, durability (and good looks), they complement our crash protectors perfectly. Easy to install, R&G Case Covers simply bolt on over the original engine casing, so no messing with adhesives, silicone or epoxies. Slimline for maximum ground clearance, ultra lightweight, matt finish and protecting one of the most vulnerable parts of the machine, these could save you £'s in the event of an accident ... Ever seen the prices of a new engine casing or the cost of removing debris from your engine?Advantage over carbon protectors: Product is screwed and not glued, which ensures a quick and easy installation and quick replacement. Screws for mounting included. This kit includes "Strong Race Covers": -Left Hand Side Crankcase Cover (Alternator) -Right Hand Side Crankcase Cover (Clutch) Suitable for: Aprilia RS - Tuono 660 models from 2021- onwards and Tuareg 660 from 2022- onwards.approved by the California Superbike School (www.superbikeschool.co.uk).

R&G UNVEILS ALL-NEW, FIM-APPROVED BRAKE LEVER GUARD UK-based crash protection leader R&G is excited to announce an all-new Brake Lever Guard, designed to protect the front brake lever from being accidentally applied during contact on track. The ergonomically-designed guard is made from the same ultra-tough material as R&G’s existing moulded lever guard and is approved by the FIM for use in all sanctioned events.Perfect for racers, trackday enthusiasts and road riders alike, R&G's all-new Brake Lever Guard is designed to protect the front brake lever from being applied during wheel-to-wheel racing, passing other motorcyclists or while filtering through traffic. Made from the same, ultra-tough material as used on the race-proven R&G Moulded Lever Guard released four years ago, the new Brake Lever Guard boasts a more ergonomic and up-to-date design. Available in gloss black, each guard features a matt black embossed R&G logo and comes with complete fitting kits, ensuring it can be easily installed to any machine without requiring any modifications. The Lever Guard made its track debut at the opening round of the 2020 Bennetts British Superbike Championship and is available for a wide range of current sportbikes and naked machines. The new guard is also compatible with the leading aftermarket clips-ons and handlebars.suitable for: Aprilia RS 660 from 2021- onwards and RS 125 from 2021- onwards.

A "must have" to give that Stem Nut of yours a finished look. Covering the stock Yoke Stem Nut and securing in place thanks to its ribbed design ensures a tight fit that wont fall out or move. Finished in Black. Sold as a single.suitable for: BMW S 1000 RR from 2019- onwards and S1000R '21- / M1000RR '21- / Triumph Trident (660) '21- and Tiger 660 2022-. delivery: 1 piece in black,approved by the California Superbike School (www.superbikeschool.co.uk).

Made from 2.5mm or thicker, clear, scratch-resistant acrylic, they offer the very best in optical clarity to maintain headlight performance and visibility, as well as offering excellent strength and protection from stones and other road debris - be it on the racetrack or your favourite green lane! The UV-stabilised acrylic used in their construction ensures R&G Headlight Shields won't 'yellow' over time like other materials on the market, ensuring it'll always look and perform at its best. Precision-formed using the latest 3D scanning technology and CNC trimmed - ensuring an exact fit to the profile of the OE light. Easy to install, each R&G Headlight Shield comes with transparent 3M™ Dual Lock™ pads for easy installation, holding the shield securely in place.suitable for: BMW S 1000 RR from 2019-2024 and M 1000 RR from 2021- and S 1000 R from 2025- onwards.

Tidy up the rear of your bike, once you have removed the rear footrest pillion hangers, fill the void left behind and cover those exposed holes in the subframe with this pair of blanking plates. These blanking plates simply screws in, covering those otherwise exposed subframe holes left once the rear footrests have been removed keeping them free from of dirt and debris buildup protecting the threads from corrosion.suitable for: Aprilia RSV 4 RR / RF / Factory models and Aprilia Tuono V4 1100 models from 2015-2020.Delivery: 2 pieces (left and right side)