BMC Performance / Race Air Filter Aprilia RS 660 / Tuono 660 2021-
€78.90*
Delivery time: 1-3 days
Free shipping from €150 within Germany
Product number:
BMCFM01117
Manufacturer Number: CFM01117
GTIN: 8055732596613
Manufacturer Number: CFM01117
GTIN: 8055732596613
Product information "BMC Performance / Race Air Filter Aprilia RS 660 / Tuono 660 2021-"
BMC air filters are produced using a “Full Moulding” system that enables the
characteristic red filter to be realised from a single mould with no welded joints
thus avoiding easy breakage. The rubber used in BMC air fi ltering systems has a
long life, is very durable and has optimum adhesion characteristics to all shapes
of airboxes. The fi ltering element is composed of layers of special cotton gauze
soaked with low viscosity oil for better fi ltration effi ciency without compromising
air fl ow penetration. The element is covered with an epoxy coated alloy mesh to
ensure protection from petrol fumes and oxidization due to air humidity. BMC
fi ltration systems give better performance to the engine, both in terms of power
and torque without compromising reliability. BMC airfilters are washable and
reusable by using the appropriate washing kit.
characteristic red filter to be realised from a single mould with no welded joints
thus avoiding easy breakage. The rubber used in BMC air fi ltering systems has a
long life, is very durable and has optimum adhesion characteristics to all shapes
of airboxes. The fi ltering element is composed of layers of special cotton gauze
soaked with low viscosity oil for better fi ltration effi ciency without compromising
air fl ow penetration. The element is covered with an epoxy coated alloy mesh to
ensure protection from petrol fumes and oxidization due to air humidity. BMC
fi ltration systems give better performance to the engine, both in terms of power
and torque without compromising reliability. BMC airfilters are washable and
reusable by using the appropriate washing kit.
- suitable for: Aprilia RS 660 / Tuono 660 models from 2021- onwards.
- (Also called Race version for even more air flow)
| Marke | Modell | Typ |
|---|---|---|
| Aprilia | RS 660 | 2021 |
| Aprilia | RS 660 | 2022 |
| Aprilia | RS 660 | 2023 |
| Aprilia | RS 660 | 2024 |
| Aprilia | RS 660 | 2025- |
| Aprilia | Tuono 660 | 2021 |
| Aprilia | Tuono 660 | 2022 |
| Aprilia | Tuono 660 | 2023 |
| Aprilia | Tuono 660 | 2024 |
| Aprilia | Tuono 660 | 2025- |
Manufacturer Information
Hersteller:
BMC S.r.l.
Via Roslè 115
40059 Medicina (Bologna)
Italien
E-Mail: info@bmcairfilters.com
Webseite: bmcairfilters.com
BMC S.r.l.
Via Roslè 115
40059 Medicina (Bologna)
Italien
E-Mail: info@bmcairfilters.com
Webseite: bmcairfilters.com
Login
Skip product gallery
Kunden kauften auch
Tip
Eazi-Grip Dashboard Screen Protector Kit Aprilia RS 660 / Tuono 660 2021-2024 / Moto Guzzi V85 TT 2019-2023
€16.90*
The all-new Dashboard Protection kit is made from high quality, anti-scratch material. This bespoke screen protector kit has been designed to protect the delicate dashboard screen on your bike from unwanted scratches and marks.
Tip
Race Seat Competition Line Aprilia RS 660 / Tuono 660 2021-
€309.90*
The Race Seats brand, the highest synonym for competition seat on a world class level, was born from the experience of more than 10 years in the world of competitions, and the outcome of thorough technical studies in close contact with engineers and racers of the World MotoGP, Moto2 and Superbike. The technology applied in the race track and the constant developments, in collaboration with the most famous frame makers and supply companies of fairing, has brought the Race Seats brand to supplying the most aristocratic and famous Teams in the world panorama of two wheelers, both in the World MotoGP- the queen class for excellence – and Moto2 prototypes and Superbikes, where the motorbikes are a series offshoot. The technology applied to the highest levels to the MotoGP, Moto2 and Superbike prototypes is then transmitted to “replica” products destined to motorbike series, both for road and track, for private clients or professional teams.
Technology, beauty, prime quality products and zealous care for details are an integral part of Race Seats production, both for amateur racers, for those who use the bikes for road use and for the most aristocratic racers in the highest world competitions, among whom Marco Melandri and Eugene Laverty of official team Yamaha World Superbike, Loris Capirossi and Randy De Puniet of the Team MotoGP Ducati Pramac, Carlos Checa of the team Ducati Althea Superbike, Troy Corser and Ruben Xaus of the Team BMW Motorrad SBK, Anthony West and Max Neukirchner of the MZ team Moto2, Alex De Angelis of JiR team Moto2, Jules Cluzel of Forward Racing team Moto2, Luca Scassa and Chaz Davies of the team Triumph Be1 and many others.
Constant research and development, the toughest, most technical tests in condition of use, choice of innovative materials – from the foam rubber, fabrics and coverings – come together in an artisanal way for a 100% Made In Italy by hand product, ensuring the highest quality for a product that positions itself technically at the top and among the most exclusive on a world level.Competition Line:
made with a layer of High density mousse (the same of SBK and moto GP
champions), this line offer a great grip and driving feeling with motorbikes also in wet conditions.
This is facilitated by the fact that the seat is 5mm higher than the standard seat.suitable for: Aprilia RS 660 / Tuono 660 models from 2021- onwards.
delivery: complete seat with seat plate for original mounting points
delivery time: The seats are very high quality and are hand made.
Eazi-Grip PRO Tank Traction Pads Aprilia RS 660 / Tuono 660 2021-
€54.89*
Eazi-Grip are pleased to announce a new addition to their Tank Grip range with the Eazi-Grip™ PRO Tank Traction Pad kits.
A progression from the Eazi-Grip™ original Traction Dome Tank Grip; developed with top teams in the British Superbike Championship and made in the UK, the self-adhesive tank grips are covered in a unique textured finish that at just 1mm thickness, has a crisp, slim-line profile and will increase the rider’s grip on the bike; drastically reducing body movement when braking and cornering, reducing arm pump and enabling a more stable body position.
The PRO Tank Traction Pad Kits are manufactured from pvc, a material that is extremely hard-wearing and durable, the textured pattern is designed for maximum grip, with minimum fatigue to rider clothing. Easy to fit, its high-strength adhesive backing ensures a highly durable product that will stay exactly where it is placed, as well as not affecting or damaging paintwork during removal or replacement.
Each Tank Traction Pad kit is supplied with precision pre-cut adhesive pieces, designed to fit the intended bike. Kits are currently offered for well over 100 different bike models, with new applications released almost weekly. EAZI Grip also offers a Universal Kit for bikes not currently provided for, or for bespoke tanks and project bikes.
All kits are available in a clear finish, to blend into the bike’s paintwork or in black to stand out and contrast.
The products are used by the top teams. Among them are, Quattro Plant Kawasaki, T3 Racing, Racing ILR or Chris Walker Racing.Advantages:
Abrasion-proof surface
Removable without damaging the finish
Stabilizes the cornering performance as well as the braking and accelerating.
delivery included: left and right side
Color: black or clearsuitable for: Aprilia RS 660 / Tuono 660 models from 2021- onwards.
(round recess for manufacturer logo in pad included)
Tip
R&G "Strong Race" Engine Case Cover Kit Aprilia RS - Tuono 660 2021- / Tuareg 660 2022-
€170.90*
R&G Race Series Engine Case Covers have been specifically developed in collaboration with selected high level BSB race teams and crash tested in BSB level racing events to ensure they meet and exceed all required standards for case protection.
R&G Racing Engine Case Cover Skidder Testimonial
In addition to the existing R&G Engine Case Cover range comes R&G's *NEW* 2015-spec Race Series Engine Case Covers, specially developed at the request of race teams and riders alike. They include a replaceable puck or slider on the impact face, giving the case not only more meat to grind through to further enhance the protection offered by a standard R&G Engine Case Cover but also offering an easy low-cost fix should you only have a "minor" slide, crash or drop. Engineered to allow just the "puck" to be replaced and your cover to be reused again and again!
Crafted from 4mm polypropylene for strength, durability (and good looks), they complement our crash protectors perfectly.
Easy to install, R&G Case Covers simply bolt on over the original engine casing, so no messing with adhesives, silicone or epoxies.
Slimline for maximum ground clearance, ultra lightweight, matt finish and protecting one of the most vulnerable parts of the machine, these could save you £'s in the event of an accident ... Ever seen the prices of a new engine casing or the cost of removing debris from your engine?Advantage over carbon protectors:
Product is screwed and not glued, which ensures a quick and easy installation and quick replacement.
Screws for mounting included.
This kit includes "Strong Race Covers":
-Left Hand Side Crankcase Cover (Alternator)
-Right Hand Side Crankcase Cover (Clutch)
Suitable for: Aprilia RS - Tuono 660 models from 2021- onwards and Tuareg 660 from 2022- onwards.approved by the California Superbike School (www.superbikeschool.co.uk).
R&G Racing BSB Brake Lever Guard Aprilia RS 660 2021- / RS 125 2021-
€61.90*
R&G UNVEILS ALL-NEW, FIM-APPROVED BRAKE LEVER GUARD
UK-based crash protection leader R&G is excited to announce an all-new Brake Lever Guard, designed to protect the front brake lever from being accidentally applied during contact on track. The ergonomically-designed guard is made from the same ultra-tough material as R&G’s existing moulded lever guard and is approved by the FIM for use in all sanctioned events.Perfect for racers, trackday enthusiasts and road riders alike, R&G's all-new Brake Lever Guard is designed to protect the front brake lever from being applied during wheel-to-wheel racing, passing other motorcyclists or while filtering through traffic.
Made from the same, ultra-tough material as used on the race-proven R&G Moulded Lever Guard released four years ago, the new Brake Lever Guard boasts a more ergonomic and up-to-date design. Available in gloss black, each guard features a matt black embossed R&G logo and comes with complete fitting kits, ensuring it can be easily installed to any machine without requiring any modifications.
The Lever Guard made its track debut at the opening round of the 2020 Bennetts British Superbike Championship and is available for a wide range of current sportbikes and naked machines. The new guard is also compatible with the leading aftermarket clips-ons and handlebars.suitable for: Aprilia RS 660 from 2021- onwards and RS 125 from 2021- onwards.
R&G Radiator Guard Aprilia RS 660 2021- (RAD0268)
€101.90*
R&G Radiator Guards are available in most cases in black or silver finish. They are made from pressed aluminium and feature a neat, seamless frame (where applicable). They improve the looks of your bike and help to protect your expensive and vulnerable radiator from flying debris.
No permanent modifications need to be made to the bike.Colour: black or silver (Shipping time for silver 1 week)suitable for: Aprilia RS 660 from 2021- onwards.
Eazi-Grip PRO Center Tank Pad DESIGN D
€26.91*
We are a specialist UK manufacturer of Eazi-Grip™ high performance motorbike tank grips. We have worked in close association with leading teams in the BSB paddock and have developed a tank pad that features unique hemispherical traction domes that offer high levels of grip, combined with exceptional rider feel. We have over 100 models to choose from and give full technical back up from our experienced staff, who have track, road and race experience.
EAZI GRIP™ TANK PADS
Eazi-Grip™ Tank PADS have been specifically designed to assist in better bike control, enabling a rider to maintain a stable body position during cornering and braking, whilst also relieving rider fatigue
CUSTOM FIT TANK PADS
Eazi-Grip™ Tank Traction Pads are supplied pre-cut to fit a wide variety of bikes. For more unusual applications we also supply universal sheets that can be cut to the required profile. Eazi-Grip™ Tank PADS are available in black and clear.
HIGH QUALITY AND DURABLE
Eazi-Grip™ Tank Grips have a soft but durable domed surface providing the rider with increased control whilst reducing fatigue and minimising wear to the rider’s leathers.Advantages:
Abrasion-proof domed surface
Clear perusal to decor and finish
Removable without damaging the finish
Stabilizes the cornering performance as well as the braking and accelerating.
The Tankpads are an excellent addition to our Eazi Grip Traction Pads for maximum grip.
Color: black or clear (please choose)suitable for: universal
(round recess for manufacturer logo in pad included)
Tip
R&G Swingarm Protectors Ducati 899 / 959 Panigale / Aprilia RS - Tuono - Tuareg 660 / Yamaha YZF-R 125 / MT-125
€34.90*
Our R & G swingarm protectors of multiple functions in one product:
The product will give protection to the swingarm area in most crashes. Also the bike can be lifted on the Cotton Reels, using a paddock stand with hooks.The mounting is simple. The protectors are simply screwed into the rear swingarm. Mounting screws are included. The carbon toe chain guard its not included in this offer.Delivery: left & right side
suitable for: Ducati 899 / 959 Panigale models all years / Aprilia RS - Tuono and Tuareg 660 models from 2021- onwards / Yamaha YZF-R 125 from 2019-2021 and MT-125 from 2020- onwards.
Tip
R&G Dashboard 2er Screen Protector Kit Aprilia Tuono V4 1100 / RSV 4 2017-2020 / RS - Tuono 660 2021-
€35.90*
The all-new R&G Second Skin Dashboard Protection kit is made from high quality, anti-scratch material. This bespoke screen protector kit has been designed to protect the delicate dashboard screen on your bike from unwanted scratches and marks.
Kit includes detailed instructions to aid in the dashboard protector placement, 2x dashboard protectors (1x spare), mini spray bottle, suede polishing cloth, wet & dry wipe, squeegee and dust removal strip.suitable for: Aprilia Tuono V4 1100 / RSV 4 models from 2017-2020 and Aprilia RS - Tuono 660 from 2021- onwards.
Skip product gallery
Zubehör
Tip
BMC Air Filter Washing Kit (Oil Spray 200ml and Cleaner 500ml)
€24.89*
BMC air filters are produced using a “Full Moulding” system that enables the
characteristic red filter to be realised from a single mould with no welded joints
thus avoiding easy breakage. The rubber used in BMC air fi ltering systems has a
long life, is very durable and has optimum adhesion characteristics to all shapes
of airboxes. The fi ltering element is composed of layers of special cotton gauze
soaked with low viscosity oil for better fi ltration effi ciency without compromising
air fl ow penetration. The element is covered with an epoxy coated alloy mesh to
ensure protection from petrol fumes and oxidization due to air humidity. BMC
fi ltration systems give better performance to the engine, both in terms of power
and torque without compromising reliability. BMC airfilters are washable and
reusable by using the appropriate washing kit.1x BMC Air Filter Washing Kit (Oil Spray 200ml and Cleaner 500ml)BMC Performance Air Filter are successfully used for example in the Endurance World Championship in the Superbike World Championship or of course in the Moto GP.
Among the teams to drive it from success to success, including big names such as Yart, Aprilia Factory Team SBK or naturally factory Yamaha team Moto GP and many more .....