DENALI 2.0 DataDim Dual-Intensity Controller

This DENALI Premium Wiring Harness features high-quality waterproof components and is designed to power two DENALI 2.0 LED Light Pods. It features low profile, water tight connectors and premium moulded wire to ensure moisture is kept out of the system. The harness includes a completely sealed, waterproof switch that was engineered from the ground up to withstand harsh out-door abuse on powersports vehicles. Its clever design can be either flush or bar mounted. The harness also features our clever HotSwap design that enables an effortless swap from the standard single-intensity relay to our Dual-Intensity DataDim Controller. (sold separately) Plug in our DataDim Controller to enable the DENALI lights to switch between half and full intensity with your vehicle's original high beam switch.

Denali SoundBOMB Mini 113dB Horn (DENTT-SB.10200.B) Producing an massive 113 decibels of sound, the SoundBomb is over twice as loud as a standard motorcycle horn! The Denali™ SoundBomb was designed for those who want to be heard, but still want to maintain a stylish look. Thanks to its compact design and blacked-out housing, the SoundBomb will practically disappear once installed. At 113 decibels, the distinct low-tone sound from the DENALI SoundBomb Mini is overtwice as loud as a typical 100 decibel disc horn. Designed to be a direct Plug & Play upgrade from your factory horn, requiring no additional relay or wiring harness. When stock isn't quite enough, be heard with the SoundBomb Mini.Compatible with all CANbus electrical systems. Specifications: Sound Output: 113 dB at 3 feet Current Draw: 5 Amp Dimensions: 3.25"(82mm) x 3.4"(86mm) x 2.5"(63mm) Stylish All Black Design CANbus compatible Included: Single Piece Electromagnetic Horn Fully illustrated installation instructionsPlease note - Certain newer BMWs have a single horn connector and require an additional connector. Please see product code DENDNL.WHS.10100 in our shop.

The DENALI horn mount for the BMW R1200GS LC '15-'18 & R1200GS Adventure '14-19, R1250GS / R1250GSA '19- is a bike-specific mounting kit for installing Denali SoundBomb Compact Dual-Tone Air Horn. All mounting hardware and instructions included. For easy wiring, check out the Plug-n-Play wiring kit. Use this slick horn mount for the cleanest looking installation possible!

Denali SoundBOMB 120dB Horn (DENTT-SB.10000.B) Producing an earsplitting 120 decibels of sound, the SoundBomb is four times louder than a standard motorcycle horn! The Denali™ SoundBomb was designed for those who want to be heard, but still want to maintain a stylish look. Thanks to its compact design and blacked-out housing, the SoundBomb will practically disappear once installed. The unique design of the Denali compact horn features a rugged molded clamp that mechanically mates the compressor to the acoustic unit. This makes the SoundBomb virtually indestructible even in high vibration applications.Compatible with all CANbus electrical systems. Specifications: Sound Output: 120 dB at 3 feet Current Draw: 20 Amp Dimensions: 5.4” (137mm) wide x 4.5” (116mm) high x 3.6” (86 mm) deep Stylish All Black Design CANbus compatible Included: Single Piece Electro-Pneumatic Horn 12 volt, 30 amp relayPlease note - Certain newer BMWs have a single horn connector and require an additional connector. Please see product code DENDNL.WHS.10100 in our shop.

Denali 2.0 Light Kits are brighter, more robust, and a lot more versatile. The all new Cree High-Intensity 10 watt LED's are focused through our TriOptic Lens System to give you three unique beam patterns in one kit. Equipped with DataDim Technology and a modular HotSwap wiring harness, the lights can be upgraded in seconds to switch between half and full intensity with your vehicle's original high beam switch. Our DrySeal submersible waterproof construction and Impact PC Bezels create super durable light and switch housings that can withstand the most extreme environments without giving up. E-Mark Approval Number: R-PL-E9-01.16447.DENALI 2.0 Features HiDrive High-Intensity Cree LED's TriOptic Multi-Beam Lens System DataDim LED Dimming Technology HotSwap Modular Wiring Harness System DrySeal Submersible Waterproof Illuminated Switch DrySeal Submersible Waterproof Light Housings Impact PC Corrosion-Proof Bezels LiveActive Intelligent Thermal Management Chrome Plated Optic Holders Low-Profile Mount with Stainless Steel Hardware Handlebar Switch Mounts Included E Mark Lenses Included Features Explained: HiDrive High-Intensity 10 Watt LED's: 2.0 lights feature the latest development from Cree; a new Hi-Intensity LED chip that features a redesigned primary optic to maximize light output through secondary optics. The 2.0 series LEDs are more efficient; producing more lumens and 15% more light output without increasing power draw. TriOptic Multi-Beam Lens System: 2.0 Light kits include two spot lenses and two elliptical flood lenses giving you three unique beam patterns in one kit. Use two spots for maximum distance, two elliptical floods for maximum spread, or one of each for the best of both worlds. Data Dim LED Dimming Technology: All 2.0 light pods are equipped with a dedicated 3rd-wire dimming circuit so we can use an external signal to reliably control the intensity of the LED chip at the source. Plug in our DataDim Controller (sold separately) to enable the DENALI lights to switch between half and full intensity with your vehicle's original high beam switch. Data-Dimming eliminates unnecessary modulation of the entire circuit which is unavoidable using basic two-wire dimming. HotSwap Modular Wiring Harness System: Our premium wiring harness features high-quality waterproof components and our clever HotSwap design that enables an effortless swap from the standard single-intensity relay to our dual-intensity DataDim controller (sold separately). DrySeal Submersible Waterproof Illuminated Switch: Our beefy, completely sealed, waterproof switch was engineered from the ground up to withstand harsh out-door abuse on powersports vehicles. It's clever design can be either flush or bar mounted. DrySeal Submersible Waterproof Light Housings: In addition to molded silicone gasket seals, we use a unique DrySeal construction technique that encases the wires in a potted cavity as they enter the housing. This ensures our housings are 100% watertight even when submerged underwater with the wires cut and connector removed. Impact PC Corrosion-Proof Bezels: Our Impact PC bezels are molded in 100% polycarbonate to create an impenetrable surface that won't rust, fade, or corrode even after taking repeated impacts from rocks and debris. LiveActive Intelligent Thermal Management: DENALI 2.0 lights feature cutting edge LED drivers that work with our uncompromising heatsinks to manage heat levels in real time. This duo works together to ensure that our lights stay cool enough to maintain the maximum light output when you need it most. Chrome Plated Optic Holders: We take the extra step to chrome plate our optic holders to maximize reflectivity and refine the appearance match the original chrome reflectors of your vehicle headlights. Low-Profile Mount with Stainless Steel Hardware: DENALI 2.0 light pods include a robust, low-profile hinge mount and stainless steel M8 mounting hardware. The low-profile hinge creates a super clean installation while maintaining maximum strength. Handlebar Switch Mount Included: Our versatile switch design can be either flush, perch, or bar mounted to your vehicle. DENALI 2.0 light kits include a handlebar mount to provide an integrated mounting location for the light switch right out of the box. E Mark Approved Lenses DENALI 2.0 kits include E Mark approved lenses LED's: (8x) 10 Watt Cree XPL HI Power Draw: 6.6 Amps Beam Distance (Spot): 800 Feet Beam Width (Spot): 110 Feet Raw Lumens: 8760 Intensity: Single Intensity Harness DataDim Compatible: Yes Operating Voltage: 12 VDC Pod Size: 3.9" Square x 2.6" DeepD4 Kit Contents: (2x) LED Light Pods (2x) True-Hybrid Lenses (Installed) (2x) E Mark Approved Spot Lenses (included) (1x) HotSwap Single Intensity Wiring Harness (1x) DrySeal Waterproof Illuminated Switch (1x) 7/8" inch Handlebar Switch Mount (1x) 1 inch Handlebar Switch Mount (2x) Hinge Mounts with M8 Stainless Steel Hardware (4x) Zip Ties & (1x) Adhesive Mounting Square

This Denali Mount Kits allow you to mount any Denali lights on your BMW R 1200 GS Adventure 2014- with ease, the laser-cut mild steel powder coated black bracket is both strong and attractive. This kit allows fitment of any Denali LED Lights.What's in the Box: Denali Lighting LED mounting bracket Installation instructions Mounting HardwarePlease Note: No lights are included with this kit, Mounting Bracket ONLY. Denali Lights available separately.

Denali BMW OEM Harness Adapter for Denali SoundBomb Horn (DENDNL.WHS.10100) Use the DENALI wiring adapter for connecting SoundBomb horns to the OEM BMW harness for a true plug & play connection. No wire tapping or other modifications to the original harness are necessary, just plug directly into the factory connector to send triggered power from your motorcycle. This handy little adapter is all you need when connecting a SoundBomb Mini to your BMW! For the original Compact SoundBomb and Split horn version, this special connector can be used to send triggered power from the harness so your factory horn button can activate your powerful new horn!. (The plug n play wire harness is still recommended to power both the Compact and Split models).Features: Enables true plug & play connection Plugs directly into OEM BMW horn connector No need to modify factory wiring No other wiring needed for SoundBomb Mini Functions as trigger for SoundBomb Compact Horn and SoundBomb Split Horn Simple & easy to install

DENALI 2.0 DrySeal HI-LOW-OFF Waterproof Switch (DENDNL.WHS.11200) The DENALI HI-LOW-OFF Switch replaces the standard ON-OFF switch. The switch enables independent dimming of the lights, separate from the vehicle's OEM lighting system. This eradicates the issues presented by vehicles that do not provide and a clean 12v high beam trigger signal. This switch is also a great option for those who want full independent control of their auxiliary lights. In addition to moulded silicone gasket seals, we use a unique DrySeal construction technique that encases the wires in a potted cavity as they enter the housing. This ensures our housings are 100% watertight even when submerged underwater with the wires cut and connector removed.What's In The Box? (x1) DrySeal HI-LOW-OFF Waterproof Switch (x1) Adhesive Pad

Denali Crashbar Light Mounts (Fits crashbars 21mm-29mm in diameter) These stylish clamps are machined from 6061-T6 Aluminum for strength and durability. The kit allows fitment of any Denali LED Lighting Kit to any tubular bar ranging from 21mm to 29mm in diameter. The bracket can be mounted in numerous positions allowing the light pods to be placed for optimal beam projection, while keeping the pods themselves protected.Kit Includes: 2x black anodized aluminum machined clamp Mounting HardwareCompatible with ALL Denali lights.

DENALI 2.0 Switch Eliminator Plug (DENDNL.WHS.11300) The DENALI Power Switch Eliminator plug replaces the standard On-Off switch so your lights will automatically power on and off with the vehicle's ignition. Enjoy the convenience of having your lights on any time your bike is running and peace of mind knowing they will turn off with the ignition.What's In The Box? (x1) Power Switch Eliminator