Denali Auxiliary Light Mount For BMW F850 GS / F750 GS 2018-

Denali Crashbar Light Mounts (Fits crashbars 32mm-38mm in diameter) These stylish clamps are machined from 6061-T6 Aluminum for strength and durability. The kit allows fitment of any Denali LED Lighting Kit to any tubular bar ranging from 32mm to 38mm in diameter. The bracket can be mounted in numerous positions allowing the light pods to be placed for optimal beam projection, while keeping the pods themselves protected.Kit Includes: 2x anodized aluminum machined clamp Mounting HardwareCompatible with ALL Denali lights.

2.0 CANsmart Plug-N-Play Controller For BMW K1600 Series, F750GS & F850GS(A) '19-. S1000XR '15-'19, F900XR '20- E-Mark Approval Number: E11*10R05/01*10262*00 We didn't want to make just another accessory controller, we wanted to make a smarter one. Harness the power and intelligence of your vehicle's CANbus electrical system. The DENALI CANsmart Controller provides plug-n-play installation of up to four accessories to enable dozens of customizable settings that can be controlled right from the BMW "WonderWheel" or the CANsmart Accessory Manager Software. The four dedicated circuits are pre-programmed to connect and independently control two sets of auxiliary lights, an auxiliary horn, and an auxiliary brake light. Each accessory circuit is electronically fused and ready to rock right out of the box. The two auxiliary light circuits enable independent adjustment of high and low beam brightness right from the vehicles "WonderWheel". It also features a "flash to pass" and "strobe when horn active" setting that will strobe the auxiliary lights when you pulse your high beam switch or sound your horn. The feature-rich brake light circuit will transform a simple 2-wire brake light into a "smart brake light" complete with running light, multiple flash pattern, and deceleration activated braking functionality. The horn circuit enables the addition of an auxiliary horn without having to add a relay and dedicated horn wiring harness. Simple Circuit Over-Ride Want more flexibility; we thought you might. You can set any of the four circuits to "Simple Circuit" Mode which will disable all custom circuit settings to provide a clean switched 12V circuit to power an accessory of your choice. Use this setting to power an alternative accessory in place of the dedicated DENALI accessory. The electronic fuse is the only active setting so you can properly fuse your accessory.

Denali 2.0 Light Kits are brighter, more robust, and a lot more versatile. The all new Cree High-Intensity 10 watt LED's are focused through our TriOptic Lens System to give you three unique beam patterns in one kit. Equipped with DataDim Technology and a modular HotSwap wiring harness, the lights can be upgraded in seconds to switch between half and full intensity with your vehicle's original high beam switch. Our DrySeal submersible waterproof construction and Impact PC Bezels create super durable light and switch housings that can withstand the most extreme environments without giving up. E-Mark Approval Number: R-PL-E9-01.16447.DENALI 2.0 Features HiDrive High-Intensity Cree LED's TriOptic Multi-Beam Lens System DataDim LED Dimming Technology HotSwap Modular Wiring Harness System DrySeal Submersible Waterproof Illuminated Switch DrySeal Submersible Waterproof Light Housings Impact PC Corrosion-Proof Bezels LiveActive Intelligent Thermal Management Chrome Plated Optic Holders Low-Profile Mount with Stainless Steel Hardware Handlebar Switch Mounts Included E Mark Lenses Included Features Explained: HiDrive High-Intensity 10 Watt LED's: 2.0 lights feature the latest development from Cree; a new Hi-Intensity LED chip that features a redesigned primary optic to maximize light output through secondary optics. The 2.0 series LEDs are more efficient; producing more lumens and 15% more light output without increasing power draw. TriOptic Multi-Beam Lens System: 2.0 Light kits include two spot lenses and two elliptical flood lenses giving you three unique beam patterns in one kit. Use two spots for maximum distance, two elliptical floods for maximum spread, or one of each for the best of both worlds. Data Dim LED Dimming Technology: All 2.0 light pods are equipped with a dedicated 3rd-wire dimming circuit so we can use an external signal to reliably control the intensity of the LED chip at the source. Plug in our DataDim Controller (sold separately) to enable the DENALI lights to switch between half and full intensity with your vehicle's original high beam switch. Data-Dimming eliminates unnecessary modulation of the entire circuit which is unavoidable using basic two-wire dimming. HotSwap Modular Wiring Harness System: Our premium wiring harness features high-quality waterproof components and our clever HotSwap design that enables an effortless swap from the standard single-intensity relay to our dual-intensity DataDim controller (sold separately). DrySeal Submersible Waterproof Illuminated Switch: Our beefy, completely sealed, waterproof switch was engineered from the ground up to withstand harsh out-door abuse on powersports vehicles. It's clever design can be either flush or bar mounted. DrySeal Submersible Waterproof Light Housings: In addition to molded silicone gasket seals, we use a unique DrySeal construction technique that encases the wires in a potted cavity as they enter the housing. This ensures our housings are 100% watertight even when submerged underwater with the wires cut and connector removed. Impact PC Corrosion-Proof Bezels: Our Impact PC bezels are molded in 100% polycarbonate to create an impenetrable surface that won't rust, fade, or corrode even after taking repeated impacts from rocks and debris. LiveActive Intelligent Thermal Management: DENALI 2.0 lights feature cutting edge LED drivers that work with our uncompromising heatsinks to manage heat levels in real time. This duo works together to ensure that our lights stay cool enough to maintain the maximum light output when you need it most. Chrome Plated Optic Holders: We take the extra step to chrome plate our optic holders to maximize reflectivity and refine the appearance match the original chrome reflectors of your vehicle headlights. Low-Profile Mount with Stainless Steel Hardware: DENALI 2.0 light pods include a robust, low-profile hinge mount and stainless steel M8 mounting hardware. The low-profile hinge creates a super clean installation while maintaining maximum strength. Handlebar Switch Mount Included: Our versatile switch design can be either flush, perch, or bar mounted to your vehicle. DENALI 2.0 light kits include a handlebar mount to provide an integrated mounting location for the light switch right out of the box. E Mark Approved Lenses DENALI 2.0 kits include E Mark approved lenses LED's: (8x) 10 Watt Cree XPL HI Power Draw: 6.6 Amps Beam Distance (Spot): 800 Feet Beam Width (Spot): 110 Feet Raw Lumens: 8760 Intensity: Single Intensity Harness DataDim Compatible: Yes Operating Voltage: 12 VDC Pod Size: 3.9" Square x 2.6" DeepD4 Kit Contents: (2x) LED Light Pods (2x) True-Hybrid Lenses (Installed) (2x) E Mark Approved Spot Lenses (included) (1x) HotSwap Single Intensity Wiring Harness (1x) DrySeal Waterproof Illuminated Switch (1x) 7/8" inch Handlebar Switch Mount (1x) 1 inch Handlebar Switch Mount (2x) Hinge Mounts with M8 Stainless Steel Hardware (4x) Zip Ties & (1x) Adhesive Mounting Square

This Denali Mount Kits allow you to mount any Denali lights on your BMW R 1200 GS Adventure 2014- with ease, the laser-cut mild steel powder coated black bracket is both strong and attractive. This kit allows fitment of any Denali LED Lights.What's in the Box: Denali Lighting LED mounting bracket Installation instructions Mounting HardwarePlease Note: No lights are included with this kit, Mounting Bracket ONLY. Denali Lights available separately.

Denali 2.0 Light Kits are brighter, more robust, and a lot more versatile. The all new Cree High-Intensity 10 watt LED's are focused through our TriOptic Lens System to give you three unique beam patterns in one kit. Equipped with DataDim Technology and a modular HotSwap wiring harness, the lights can be upgraded in seconds to switch between half and full intensity with your vehicle's original high beam switch. Our DrySeal submersible waterproof construction and Impact PC Bezels create super durable light and switch housings that can withstand the most extreme environments without giving up.DENALI 2.0 Features HiDrive High-Intensity Cree LED's TriOptic Multi-Beam Lens System DataDim LED Dimming Technology HotSwap Modular Wiring Harness System DrySeal Submersible Waterproof Illuminated Switch DrySeal Submersible Waterproof Light Housings Impact PC Corrosion-Proof Bezels LiveActive Intelligent Thermal Management Chrome Plated Optic Holders Low-Profile Mount with Stainless Steel Hardware Handlebar Switch Mounts Included E Mark Lenses Included Features Explained: HiDrive High-Intensity 10 Watt LED's: 2.0 lights feature the latest development from Cree; a new Hi-Intensity LED chip that features a redesigned primary optic to maximize light output through secondary optics. The 2.0 series LEDs are more efficient; producing more lumens and 15% more light output without increasing power draw. TriOptic Multi-Beam Lens System: 2.0 Light kits include two spot lenses and two elliptical flood lenses giving you three unique beam patterns in one kit. Use two spots for maximum distance, two elliptical floods for maximum spread, or one of each for the best of both worlds. Data Dim LED Dimming Technology: All 2.0 light pods are equipped with a dedicated 3rd-wire dimming circuit so we can use an external signal to reliably control the intensity of the LED chip at the source. Plug in our DataDim Controller (sold separately) to enable the DENALI lights to switch between half and full intensity with your vehicle's original high beam switch. Data-Dimming eliminates unnecessary modulation of the entire circuit which is unavoidable using basic two-wire dimming. HotSwap Modular Wiring Harness System: Our premium wiring harness features high-quality waterproof components and our clever HotSwap design that enables an effortless swap from the standard single-intensity relay to our dual-intensity DataDim controller (sold separately). DrySeal Submersible Waterproof Illuminated Switch: Our beefy, completely sealed, waterproof switch was engineered from the ground up to withstand harsh out-door abuse on powersports vehicles. It's clever design can be either flush or bar mounted. DrySeal Submersible Waterproof Light Housings: In addition to molded silicone gasket seals, we use a unique DrySeal construction technique that encases the wires in a potted cavity as they enter the housing. This ensures our housings are 100% watertight even when submerged underwater with the wires cut and connector removed. Impact PC Corrosion-Proof Bezels: Our Impact PC bezels are molded in 100% polycarbonate to create an impenetrable surface that won't rust, fade, or corrode even after taking repeated impacts from rocks and debris. LiveActive Intelligent Thermal Management: DENALI 2.0 lights feature cutting edge LED drivers that work with our uncompromising heatsinks to manage heat levels in real time. This duo works together to ensure that our lights stay cool enough to maintain the maximum light output when you need it most. Chrome Plated Optic Holders: We take the extra step to chrome plate our optic holders to maximize reflectivity and refine the appearance match the original chrome reflectors of your vehicle headlights. Low-Profile Mount with Stainless Steel Hardware: DENALI 2.0 light pods include a robust, low-profile hinge mount and stainless steel M8 mounting hardware. The low-profile hinge creates a super clean installation while maintaining maximum strength. Handlebar Switch Mount Included: Our versatile switch design can be either flush, perch, or bar mounted to your vehicle. DENALI 2.0 light kits include a handlebar mount to provide an integrated mounting location for the light switch right out of the box. E Mark Approved Lenses DENALI 2.0 kits include E Mark approved lenses D2 Kit Product Specs: LED's: (2x) 10 Watt Cree XPL HI Power Draw: 1.6 Amps Beam Distance (Spot): 525 Feet Beam Width (Spot): 75 Feet Raw Lumens: 2190 Intensity: Single Intensity Harness DataDim Compatible: Yes Operating Voltage: 12 VDC Pod Size: 2.2" Round x 2.4" Deep E-Mark Approval Number: AR-E9-00.16143D2 Kit Contents (2x) LED Light Pods (2x) Spot Lenses (Installed) (2x) E Mark Approved Elliptical Flood Lenses (Included) (1x) HotSwap Single Intensity Wiring Harness (1x) DrySeal Waterproof Illuminated Switch (1x) 7/8" inch Handlebar Switch Mount (1x) 1 inch Handlebar Switch Mount (2x) Hinge Mounts with M8 Stainless Steel Hardware (4x) Zip Ties & (1x) Adhesive Mounting Square

Denali Crashbar Light Mounts (Fits crashbars 21mm-29mm in diameter) These stylish clamps are machined from 6061-T6 Aluminum for strength and durability. The kit allows fitment of any Denali LED Lighting Kit to any tubular bar ranging from 21mm to 29mm in diameter. The bracket can be mounted in numerous positions allowing the light pods to be placed for optimal beam projection, while keeping the pods themselves protected.Kit Includes: 2x black anodized aluminum machined clamp Mounting HardwareCompatible with ALL Denali lights.