R&G Racing Crash Protectors "No Cut" Yamaha YZF R1 / R1 M 2015-
€98.90*
Delivery time: 3-4 weeks
Free shipping from €150 within Germany
Product number:
ABCP0388BK.1
Manufacturer Number: CP0388BK
GTIN: 5055780363765
Manufacturer Number: CP0388BK
GTIN: 5055780363765
Product information "R&G Racing Crash Protectors "No Cut" Yamaha YZF R1 / R1 M 2015-"
These crash protectors feature our stylish, aerodynamic Aero Bobbins and are
available with black and white bobbins.
Utilising specially designed spacers allowing for an easy, hassle free installation, putting the protection exactly where its needed for maximum effectiveness.
R&G Aero Bobbins are a stylish, aerodynamic, teardrop shaped bobbin improving on the original good looks of our highly successful and popular standard round bobbins. Fitted with a removable end cap which hides the bobbins fittings, this sleek new design looks superb and is a winner on road and track!
R&G Aero Bobbins from R&G Racing - the market leaders in crash protection and the only insurance approved crash protectors on the market. As used by some of the worlds top race teams, what better endorsement do you need! R&G Racing – innovation not imitation!
available with black and white bobbins.
Utilising specially designed spacers allowing for an easy, hassle free installation, putting the protection exactly where its needed for maximum effectiveness.
R&G Aero Bobbins are a stylish, aerodynamic, teardrop shaped bobbin improving on the original good looks of our highly successful and popular standard round bobbins. Fitted with a removable end cap which hides the bobbins fittings, this sleek new design looks superb and is a winner on road and track!
R&G Aero Bobbins from R&G Racing - the market leaders in crash protection and the only insurance approved crash protectors on the market. As used by some of the worlds top race teams, what better endorsement do you need! R&G Racing – innovation not imitation!
- Our real motorcycle crash pads are pads that you can save a lot of money and problems in the event of a fall!
- Delivery: left and right side
| Marke | Modell | Typ |
|---|---|---|
| Yamaha | YZF R1 | 2015 |
| Yamaha | YZF R1 | 2016 |
| Yamaha | YZF R1 | 2017 |
| Yamaha | YZF R1 | 2018 |
| Yamaha | YZF R1 | 2019 |
| Yamaha | YZF R1 | 2020 |
| Yamaha | YZF R1 | 2021 |
| Yamaha | YZF R1 | 2022 |
| Yamaha | YZF R1 | 2023 |
| Yamaha | YZF R1 | 2024- |
| Yamaha | YZF R1 M | 2015 |
| Yamaha | YZF R1 M | 2016 |
| Yamaha | YZF R1 M | 2017 |
| Yamaha | YZF R1 M | 2018 |
| Yamaha | YZF R1 M | 2019 |
| Yamaha | YZF R1 M | 2020 |
| Yamaha | YZF R1 M | 2021 |
| Yamaha | YZF R1 M | 2022 |
| Yamaha | YZF R1 M | 2023 |
| Yamaha | YZF R1 M | 2024- |
Manufacturer Information
Hersteller:
Racing Technique Ltd. (t/a R&G)
Unit 1, Shelleys Lane
East Worldham
Alton, Hampshire, GU34 3AQ
Vereinigtes Königreich
E‑Mail: info@rg-racing.com
Webseite: rg-racing.com
Bevollmächtigter in der EU:
TechMoto
Gordemitzer Straße 3a
04425 Taucha
Deutschland
E‑Mail: service@techmoto.de
Webseite: techmoto.de
Racing Technique Ltd. (t/a R&G)
Unit 1, Shelleys Lane
East Worldham
Alton, Hampshire, GU34 3AQ
Vereinigtes Königreich
E‑Mail: info@rg-racing.com
Webseite: rg-racing.com
Bevollmächtigter in der EU:
TechMoto
Gordemitzer Straße 3a
04425 Taucha
Deutschland
E‑Mail: service@techmoto.de
Webseite: techmoto.de
Login
Skip product gallery
Kunden kauften auch
Tip
R&G Carbon Tank Protector Pair Yamaha YZF R1 / R1 M 2015-
€137.90*
Our Tank Sliders are made from Carbon fibre which is Kevlar reinforced, offering excellent crash protection and wear resistance. Specially moulded to fitting perfectly onto the tank, they are designed to fit onto the most pronounced corners and likely areas to get him in the event of a crash or drop.
Application takes only minutes and they could save you having to replacing your tank which can get dented or scratched in the event of a crash.suitable for: Yamaha YZF R1 / R1 M models from 2015- onwards.
Delivery: left and right sideapproved by the California Superbike School (www.superbikeschool.co.uk).
R&G Swingarm Protectors Yamaha YZF R1 / R1 M 2015- / MT-10 2016-
€82.90*
Are they cotton reels or spindle sliders? Well they are both really!!
The cotton reel is mounted to a special aluminium bracket (included with the kit). Due to the position of the cotton reel on the bracket, these protectors give protection to the swingarm area and the bike can be lifted using a paddock stand.The protectors are supplied and fitted together, with a special black-anodized aluminum bracket. This bracket is used, the forces occurring in a fall and reduce divert forces from the wing to the rear.
Conveniently, on the aluminum plate, a mark is attached, after you can perfectly adjust your chain.
Since the guards are bolted to the bracket, you can easily exchange after a fall.Delivery: left & right side
suitable for. Yamaha YZF R1 / R1 M models from 2015- and MT-10 from 2016- onwards.
The swingarm protectors on the pictures which are screwed in the swingarm you can buy separately.
BMC Performance / Race Air Filter Yamaha YZF R1 / R1 M 2015- / MT-10 2016-2021
€78.90*
BMC air filters are produced using a “Full Moulding” system that enables the
characteristic red filter to be realised from a single mould with no welded joints
thus avoiding easy breakage. The rubber used in BMC air fi ltering systems has a
long life, is very durable and has optimum adhesion characteristics to all shapes
of airboxes. The fi ltering element is composed of layers of special cotton gauze
soaked with low viscosity oil for better fi ltration effi ciency without compromising
air fl ow penetration. The element is covered with an epoxy coated alloy mesh to
ensure protection from petrol fumes and oxidization due to air humidity. BMC
fi ltration systems give better performance to the engine, both in terms of power
and torque without compromising reliability. BMC airfilters are washable and
reusable by using the appropriate washing kit.suitable for: Yamaha YZF R1 / R1 M from 2015- onwards and MT-10 models from 2016-2021.
(availabe also as Race Kit with higher air flow rate)BMC Performance Air Filter are successfully used for example in the Endurance World Championship in the Superbike World Championship or of course in the Moto GP.
Among the teams to drive it from success to success, including big names such as Yart, Aprilia Factory Team SBK or naturally factory Yamaha team Moto GP and many more .....
BMC Performance / Race Air Filter Suzuki GSX-R 1000 2017-
€76.90*
BMC air filters are produced using a “Full Moulding” system that enables the
characteristic red filter to be realised from a single mould with no welded joints
thus avoiding easy breakage. The rubber used in BMC air fi ltering systems has a
long life, is very durable and has optimum adhesion characteristics to all shapes
of airboxes. The fi ltering element is composed of layers of special cotton gauze
soaked with low viscosity oil for better fi ltration effi ciency without compromising
air fl ow penetration. The element is covered with an epoxy coated alloy mesh to
ensure protection from petrol fumes and oxidization due to air humidity. BMC
fi ltration systems give better performance to the engine, both in terms of power
and torque without compromising reliability. BMC airfilters are washable and
reusable by using the appropriate washing kit.suitable for: Suzuki GSX-R 1000 from 2017- onwards.
(availabe also as Race Kit with higher air flow rate)BMC Performance Air Filter are successfully used for example in the Endurance World Championship in the Superbike World Championship or of course in the Moto GP.
Among the teams to drive it from success to success, including big names such as Yart, Aprilia Factory Team SBK or naturally factory Yamaha team Moto GP and many more .....
Tip
R&G Racing Fork Protectors Honda CB / CBR 650 R 2019-
€53.90*
These fork protectors help to eliminate damage to the front forks during a drop. The mounting screws are sunk and can not be sanded or abraded.Delivery: left & right side
suitable for: Honda CB / CBR 650 R models from 2019- onwards.
Tip
R&G Racing Swingarm Protectors Yamaha YZF R1 / R1 M 2015-
€63.90*
Our R & G swingarm protectors protect the swingarm in the event of a fall.
- Protection of the swingarm in the event of a fall (mounting screws are sunk and can not be turned on or sanded off).Delivery: left & right side
The Cotton Reels in the pictures you can buy separately.suitable for: Yamaha YZF R1 / R1 M models from 2015- onwards,
Tip
R&G Engine Case Cover Kit Honda CB / CBR 650 F 2014- / CB / CBR 650 R 2019-2020
€170.90*
Engine Case Cover Kit for Honda CB 650 F / CBR 650 F models from 2014- onwards and CB 650 R / CBR 650 R models from 2019-2020.
These exciting new Engine Case Covers have been developed in collaboration with selected race teams and crash tested within the R&G Racing Suzuki GSX-R Trophy. Crafted from 4mm polypropylene for strength, durability and good looks, they complement our crash protectors perfectly.
The covers simply bolt on over the original engine casing so no messing with glue or removing anything. Slimline for maximum ground clearance, ultra lightweight, matt finish and protecting one of the most vulnerable parts of the machine, these could save you money in the event of an accident ... Ever seen the prices of a new engine casing or the cost of removing debris from your engine?Advantage over carbon protectors:
Product is screwed and not glued, which ensures a quick and easy installation and quick replacement.
Screws for mounting included.
This kit includes:
- Left Hand Side Engine Case Cover (Alternator)
- Right Hand Side Engine Case Cover (Clutch)approved by the California Superbike School (www.superbikeschool.co.uk).
Tip
R&G Upper frame plugs kit Yamaha YZF R1 2015- / MT-10 2016-
€66.90*
Our frame plugs hide the unsightly holes in the frame and analyze your bike's looks. Moreover, the coverage is increased, and thus in the case of a fall protection as well as protector.suitable for: Yamaha YZF R1 models from 2015- and MT-10 from 2016- onwards,
delivery: 1x left and 1x right sideapproved by the California Superbike School (www.superbikeschool.co.uk).
Tip
R&G Crash Protectors "No Cut" Honda CB / CBR 650 F 2014- / CBR 650 R 2019-
€130.90*
R&G Classic Bobbins from R&G Racing - the market leaders in crash protection and the only insurance approved crash protectors on the market. As used by some of the worlds top race teams, what better endorsement do you need! R&G Racing – innovation not imitation!Our real motorcycle crash pads are pads that you can save a lot of money and problems in the event of a fall!
Delivery: left and right sideSuitable for the Honda CB / CBR 650 F models from 2014- onwards and CBR 650 R from 2019- onwards,
Colour: Black,
Fairing Modification: no Mods,
Mounting Position: Engine Mount
Note: doesnt fit bikes with e-clutch
R&G Bar End Slider Yamaha YZF R1 / R1 M 2015- / R7 2021- / Honda CMX 1100 Rebel 2021-
€50.90*
These bar-end protectors are easy to install and replace the original handlebar ends.The mounting screws are sunk, so you in case of a fall can not be abraded.
Delivery: 2 pieces (left & right side)These bar end protectors are suitable for:
Yamaha YZF R1 / R1 M from 2015- and R7 from 2021- and Honda CMX 1100 Rebel Models from 2021- onwards.
R&G Racing Swingarm Protectors Yamaha YZF R1
€33.90*
Our R & G swingarm protectors of multiple functions in one product:
The product will give protection to the swingarm area in most crashes. Also the bike can be lifted on the Cotton Reels, using a paddock stand with hooks.The mounting is simple. The protectors are simply screwed into the rear swingarm. Mounting screws are included.Delivery: left & right side
suitable for: Yamaha YZF R1 models all years,
R&G "Strong Race" oil pump Cover Yamaha YZF R1 / R1 M / MT-10 2015-
€74.90*
R&G Race Series Engine Case Covers have been specifically developed in collaboration with selected high level BSB race teams and crash tested in BSB level racing events to ensure they meet and exceed all required standards for case protection.
R&G Racing Engine Case Cover Skidder Testimonial
In addition to the existing R&G Engine Case Cover range comes R&G's *NEW* 2015-spec Race Series Engine Case Covers, specially developed at the request of race teams and riders alike. They include a replaceable puck or slider on the impact face, giving the case not only more meat to grind through to further enhance the protection offered by a standard R&G Engine Case Cover but also offering an easy low-cost fix should you only have a "minor" slide, crash or drop. Engineered to allow just the "puck" to be replaced and your cover to be reused again and again!
Crafted from 4mm polypropylene for strength, durability (and good looks), they complement our crash protectors perfectly.
Easy to install, R&G Case Covers simply bolt on over the original engine casing, so no messing with adhesives, silicone or epoxies.
Slimline for maximum ground clearance, ultra lightweight, matt finish and protecting one of the most vulnerable parts of the machine, these could save you £'s in the event of an accident ... Ever seen the prices of a new engine casing or the cost of removing debris from your engine?Delivery included: 1x oil pump Cover "Strong Race" suitable for Yamaha YZF R1 / R1 M / MT-10 models from 2015- onwards.
Advantage over carbon protectors:
Product is screwed and not glued, which ensures a quick and easy installation and quick replacement.
Screws for mounting included.R&G is official supplier for the British Superbike Teams.
Tip
GB Racing Pulse Cover Yamaha YZF R1 2015- / MT-10 2016-
€79.90*
Revolutionary new tough, high-impact composite material made from 60% Long Glass Fibered Nylon
Bolt on product, allowing fast and easy removal and/or replacement
The product is designed with aesthetics in mind, and priced to be competitive with the existing products on the market
Registered DesignProtectors delivery: 1x Pulse Cover,
suitable for: Yamaha YZF R1 from 2015- and MT-10 from 2016- onwards,GB Racing products are used by many top teams worldwide.
By working closely with motorcycle racing team GB Racing developed the new generation of high-end protectors.
The high quality of the GB Racing protectors shows the official certification "FIM Approved" by the Federation Internationale de Motocyclisme.
Tip
GB Racing Engine Cover Set Yamaha YZF R1 2015-
€261.90*
Revolutionary new tough, high-impact composite material made from 60% Long Glass Fibered Nylon
Bolt on product, allowing fast and easy removal and/or replacement
The product is designed with aesthetics in mind, and priced to be competitive with the existing products on the market
Registered DesignEngine cover delivery: 1x clutch, 1x alternator, 1x pulse
suitable for: Yamaha YZF R1 from 2015- onwards,GB Racing products are used by many top teams worldwide.
By working closely with motorcycle racing team GB Racing developed the new generation of high-end protectors.
The high quality of the GB Racing protectors shows the official certification "FIM Approved" by the Federation Internationale de Motocyclisme.
Tip
R&G Fork Protectors Yamaha YZF R1 2015- / MT-10 2016- / YZF R6 2017-
€56.91*
These fork protectors help to eliminate damage to the front forks during a drop. The mounting screws are sunk and can not be sanded or abraded.Delivery: left & right side
suitable for: Yamaha YZF R1 from 2015- / YZF R6 from 2017- and MT-10 from 2016- onwards.
R&G Racing Engine Case Cover Kit Yamaha YZF R1 2015-
€225.90*
Engine Case Cover Set for the Yamaha YZF R1 / R1 M models from 2015- onwards.
These exciting new Engine Case Covers have been developed in collaboration with selected race teams and crash tested within the R&G Racing Suzuki GSX-R Trophy. Crafted from 4mm polypropylene for strength, durability and good looks, they complement our crash protectors perfectly.
The covers simply bolt on over the original engine casing so no messing with glue or removing anything. Slimline for maximum ground clearance, ultra lightweight, matt finish and protecting one of the most vulnerable parts of the machine, these could save you money in the event of an accident ... Ever seen the prices of a new engine casing or the cost of removing debris from your engine?Advantage over carbon protectors:
Product is screwed and not glued, which ensures a quick and easy installation and quick replacement.
Screws for mounting included.
This kit includes:
-Left Hand Side Crankcase Cover (Alternator)
-Right Hand Side Crankcase Cover (Clutch)
-Right Hand Side Pick Up Coverapproved by the California Superbike School (www.superbikeschool.co.uk).
R&G "Strong Race" Clutch Case Cover Yamaha YZF-R1 / M 2015-
€117.91*
R&G Race Series Engine Case Covers have been specifically developed in collaboration with selected high level BSB race teams and crash tested in BSB level racing events to ensure they meet and exceed all required standards for case protection.
R&G Racing Engine Case Cover Skidder Testimonial
In addition to the existing R&G Engine Case Cover range comes R&G's *NEW* 2015-spec Race Series Engine Case Covers, specially developed at the request of race teams and riders alike. They include a replaceable puck or slider on the impact face, giving the case not only more meat to grind through to further enhance the protection offered by a standard R&G Engine Case Cover but also offering an easy low-cost fix should you only have a "minor" slide, crash or drop. Engineered to allow just the "puck" to be replaced and your cover to be reused again and again!
Crafted from 4mm polypropylene for strength, durability (and good looks), they complement our crash protectors perfectly.
Easy to install, R&G Case Covers simply bolt on over the original engine casing, so no messing with adhesives, silicone or epoxies.
Slimline for maximum ground clearance, ultra lightweight, matt finish and protecting one of the most vulnerable parts of the machine, these could save you £'s in the event of an accident ... Ever seen the prices of a new engine casing or the cost of removing debris from your engine?Delivery included: 1x Clutch Case Cover "Strong Race" suitable for Yamaha YZF-R1 / R1 M from 2015- onwards.
Advantage over carbon protectors:
Product is screwed and not glued, which ensures a quick and easy installation and quick replacement.
Screws for mounting included.R&G is official supplier for the British Superbike Teams.
R&G "Strong Race" Engine Case Cover Kit Yamaha YZF R1 / R1 M 15-
€244.90*
R&G Race Series Engine Case Covers have been specifically developed in collaboration with selected high level BSB race teams and crash tested in BSB level racing events to ensure they meet and exceed all required standards for case protection.
R&G Racing Engine Case Cover Skidder Testimonial
In addition to the existing R&G Engine Case Cover range comes R&G's *NEW* 2015-spec Race Series Engine Case Covers, specially developed at the request of race teams and riders alike. They include a replaceable puck or slider on the impact face, giving the case not only more meat to grind through to further enhance the protection offered by a standard R&G Engine Case Cover but also offering an easy low-cost fix should you only have a "minor" slide, crash or drop. Engineered to allow just the "puck" to be replaced and your cover to be reused again and again!
Crafted from 4mm polypropylene for strength, durability (and good looks), they complement our crash protectors perfectly.
Easy to install, R&G Case Covers simply bolt on over the original engine casing, so no messing with adhesives, silicone or epoxies.
Slimline for maximum ground clearance, ultra lightweight, matt finish and protecting one of the most vulnerable parts of the machine, these could save you £'s in the event of an accident ... Ever seen the prices of a new engine casing or the cost of removing debris from your engine?Advantage over carbon protectors:
Product is screwed and not glued, which ensures a quick and easy installation and quick replacement.
Screws for mounting included.
This kit includes "Strong Race Covers":
-Left Hand Side Crankcase Cover (Alternator)
-Right Hand Side Crankcase Cover (Clutch)
-Right Hand Side Pick Up Cover
Suitable for: Yamaha YZF R1 / R1 M from ´15- onwards.approved by the California Superbike School (www.superbikeschool.co.uk).
Tip
R&G Dashboard 2er Screen Protector Kit Yamaha YZF-R1 / R1 M / MT-10 SP / MT-10 2022-
€35.90*
The all-new R&G Second Skin Dashboard Protection kit is made from high quality, anti-scratch material. This bespoke screen protector kit has been designed to protect the delicate dashboard screen on your bike from unwanted scratches and marks.
Kit includes detailed instructions to aid in the dashboard protector placement, 2x dashboard protectors (1x spare), mini spray bottle, suede polishing cloth, wet & dry wipe, squeegee and dust removal strip.suitable for: Yamaha YZF-R1 / R1 M / MT-10 SP models from 2015- onwards and MT-10 Modelle from 2022- onwards.
Tip
R&G Swingarm Protectors Honda CB|R 650F | CB|R 650 R | CB 1000 Hornet
€76.90*
Are they cotton reels or spindle sliders? Well they are both really!!
The Cotton Reel is mounted to a special, black-anodised stainless steel bracket (included with the kit). The product will give protection to the swingarm area in most crashes. Also the bike can be lifted on the Cotton Reels, using a paddock stand with hooks.delivery: left & right side
suitable for: Honda CB 650 F / CBR 650 F from 2014- onwards and CB 650 R / CBR 650 R from 2019- onwards and CB 1000 Hornet Models from 2024- onwards.
Tip
R&G Lower frame plugs kit Yamaha YZF R1 2015- / MT-10 2016-
€72.90*
Our frame plugs hide the unsightly holes in the frame and analyze your bike's looks. Moreover, the coverage is increased, and thus in the case of a fall protection as well as protector.suitable for: Yamaha YZF R1 models from 2015- and MT-10 from 2016- onwards,
delivery: 1x left and 1x right sideapproved by the California Superbike School (www.superbikeschool.co.uk).
%
Motografix Yamaha YZF R1 2015- 3D Gel Tank Pad Protector TY026CB
€29.90*
€30.17*
(0.89% saved)
Size Of Pad Approx - H= mm / W= mm
To Suit Year - Any ( universal - please see above sizes )
- Lifetime
Finish - Unique 3D Gel ( high gloss ) d Not To Bubble or Yellow
Material – Strong Adhesive Vinyl, 8 Year California Tested ( temperature range of -50°c - 110°c )
Type: Tank Protector, Offering Protection Against Leathers And Zip RubGENUINE MOTOGRAFIX TANKPADS, NUMBERBOARDS & DECALS HAVE BEEN 100% PROUDLY MADE IN ENGLAND SINCE 1997 USING THE BEST MATERIALS AVAILABLE.
ONLY ORIGINAL & GENUINE MOTOGRAFIX PRODUCTS HAVE A LIFETIME GUARANTEE (return slip included) AND ALSO INCLUDE FULL DETAILED FITTING INSTRUCTIONS.
FACTORY FIT, FINEST QUALITY 3D GEL PROTECTION SYSTEM TO PREVENT OR COVER EXISTING STONE CHIPS & SCRATCHES E.T.C AND ALSO GIVES THE BIKE THAT ALL IMPORTANT RACE LOOK.
1000's OF DESIGNS TO SUIT MOST MODELS. NEVER CONFUSE WITH CHEAP IMITATIONSBuy with confidence, buy direct from the german importer as we are Motografix importer and we have been committed to offering the highest quality products available on the market today. As you are dealing direct with the manufacturers importer and no middle man you can enjoy a fast despatch on all products straight from stock.
Products made by bikers for bikers.