R&G Carbon tank protector Pair Aprilia RS 660 / Tuono 660 2021-
€137.90*
Delivery time: 1-3 days
Free shipping from €150 within Germany
Product number:
ABTS0062
Manufacturer Number: TS0062
GTIN: 5054817147118
Manufacturer Number: TS0062
GTIN: 5054817147118
Product information "R&G Carbon tank protector Pair Aprilia RS 660 / Tuono 660 2021-"
Our Tank Sliders are made from Carbon fibre which is Kevlar reinforced, offering excellent crash protection and wear resistance. Specially moulded to fitting perfectly onto the tank, they are designed to fit onto the most pronounced corners and likely areas to get him in the event of a crash or drop.
Application takes only minutes and they could save you having to replacing your tank which can get dented or scratched in the event of a crash.
Application takes only minutes and they could save you having to replacing your tank which can get dented or scratched in the event of a crash.
- Delivery: left and right side
| Marke | Modell | Typ |
|---|---|---|
| Aprilia | RS 660 | 2021 |
| Aprilia | RS 660 | 2022 |
| Aprilia | RS 660 | 2023 |
| Aprilia | RS 660 | 2024 |
| Aprilia | RS 660 | 2025- |
| Aprilia | Tuono 660 | 2021 |
| Aprilia | Tuono 660 | 2022 |
| Aprilia | Tuono 660 | 2023 |
| Aprilia | Tuono 660 | 2024 |
| Aprilia | Tuono 660 | 2025- |
Manufacturer Information
Hersteller:
Racing Technique Ltd. (t/a R&G)
Unit 1, Shelleys Lane
East Worldham
Alton, Hampshire, GU34 3AQ
Vereinigtes Königreich
E‑Mail: info@rg-racing.com
Webseite: rg-racing.com
Bevollmächtigter in der EU:
TechMoto
Gordemitzer Straße 3a
04425 Taucha
Deutschland
E‑Mail: service@techmoto.de
Webseite: techmoto.de
Racing Technique Ltd. (t/a R&G)
Unit 1, Shelleys Lane
East Worldham
Alton, Hampshire, GU34 3AQ
Vereinigtes Königreich
E‑Mail: info@rg-racing.com
Webseite: rg-racing.com
Bevollmächtigter in der EU:
TechMoto
Gordemitzer Straße 3a
04425 Taucha
Deutschland
E‑Mail: service@techmoto.de
Webseite: techmoto.de
Login
Skip product gallery
Kunden kauften auch
Tip
R&G Rear Foot Rest Plates Set Aprilia RS 660 / Tuono 660
€77.90*
Once you have removed the pillion footrests, fill the void left behind and cover those otherwise exposed holes in the sub-frame with the R&G blanking plates.
This pair of Footrest Blanking Plates have been specially designed to cover/protect both side of the Aprilia RS660 '21- & Aprilia Tuono 660 '21-.
R&G Footrest Blanking Plates are easy to install, simply screwing into place in-place of the rear pillion pegs, covering those otherwise exposed sub-frame holes, that if left uncovered could result in corrosion of the frame/subframe from dirt, water and debris buildup.suitable for: Aprilia RS 660 / Tuono 660 models all years.Delivery: 2 pieces (left and right side)
Tip
R&G Swingarm Protectors Aprilia RS 660 / Tuono 660 2021- / Tuareg 660 2022-
€104.90*
Our R & G swingarm protectors of multiple functions in one product:
The product will give protection to the swingarm area in most crashes. Also the bike can be lifted on the Cotton Reels, using a paddock stand with hooks.The mounting is simple. The protectors are simply screwed into the rear swingarm. Mounting screws are included. the swingarm protectors in front are not included.Delivery: left & right side
suitable for: Aprilia RS 660 / Tuono 660 / Tuareg 660 models from 2021- onwards.
Tip
Eazi-Grip Dashboard Screen Protector Kit Aprilia RS 660 / Tuono 660 2021-2024 / Moto Guzzi V85 TT 2019-2023
€16.90*
The all-new Dashboard Protection kit is made from high quality, anti-scratch material. This bespoke screen protector kit has been designed to protect the delicate dashboard screen on your bike from unwanted scratches and marks.
Tip
Race Seat Competition Line Aprilia RS 660 / Tuono 660 2021-
€309.90*
The Race Seats brand, the highest synonym for competition seat on a world class level, was born from the experience of more than 10 years in the world of competitions, and the outcome of thorough technical studies in close contact with engineers and racers of the World MotoGP, Moto2 and Superbike. The technology applied in the race track and the constant developments, in collaboration with the most famous frame makers and supply companies of fairing, has brought the Race Seats brand to supplying the most aristocratic and famous Teams in the world panorama of two wheelers, both in the World MotoGP- the queen class for excellence – and Moto2 prototypes and Superbikes, where the motorbikes are a series offshoot. The technology applied to the highest levels to the MotoGP, Moto2 and Superbike prototypes is then transmitted to “replica” products destined to motorbike series, both for road and track, for private clients or professional teams.
Technology, beauty, prime quality products and zealous care for details are an integral part of Race Seats production, both for amateur racers, for those who use the bikes for road use and for the most aristocratic racers in the highest world competitions, among whom Marco Melandri and Eugene Laverty of official team Yamaha World Superbike, Loris Capirossi and Randy De Puniet of the Team MotoGP Ducati Pramac, Carlos Checa of the team Ducati Althea Superbike, Troy Corser and Ruben Xaus of the Team BMW Motorrad SBK, Anthony West and Max Neukirchner of the MZ team Moto2, Alex De Angelis of JiR team Moto2, Jules Cluzel of Forward Racing team Moto2, Luca Scassa and Chaz Davies of the team Triumph Be1 and many others.
Constant research and development, the toughest, most technical tests in condition of use, choice of innovative materials – from the foam rubber, fabrics and coverings – come together in an artisanal way for a 100% Made In Italy by hand product, ensuring the highest quality for a product that positions itself technically at the top and among the most exclusive on a world level.Competition Line:
made with a layer of High density mousse (the same of SBK and moto GP
champions), this line offer a great grip and driving feeling with motorbikes also in wet conditions.
This is facilitated by the fact that the seat is 5mm higher than the standard seat.suitable for: Aprilia RS 660 / Tuono 660 models from 2021- onwards.
delivery: complete seat with seat plate for original mounting points
delivery time: The seats are very high quality and are hand made.
%
Aprilia RS 660 3D Gel Motografix Tank Pad Protector TA026FRK
€29.90*
€30.17*
(0.89% saved)
To Suit Year - Any ( universal - please see above sizes )
- Lifetime
Finish - Unique 3D Gel ( high gloss ) d Not To Bubble or Yellow
Material – Strong Adhesive Vinyl, 8 Year California Tested ( temperature range of -50°c - 110°c )
Type: Tank Protector, Offering Protection Against Leathers And Zip RubGENUINE MOTOGRAFIX TANKPADS, NUMBERBOARDS & DECALS HAVE BEEN 100% PROUDLY MADE IN ENGLAND SINCE 1997 USING THE BEST MATERIALS AVAILABLE.
ONLY ORIGINAL & GENUINE MOTOGRAFIX PRODUCTS HAVE A LIFETIME GUARANTEE (return slip included) AND ALSO INCLUDE FULL DETAILED FITTING INSTRUCTIONS.
FACTORY FIT, FINEST QUALITY 3D GEL PROTECTION SYSTEM TO PREVENT OR COVER EXISTING STONE CHIPS & SCRATCHES E.T.C AND ALSO GIVES THE BIKE THAT ALL IMPORTANT RACE LOOK.
1000's OF DESIGNS TO SUIT MOST MODELS. NEVER CONFUSE WITH CHEAP IMITATIONSBuy with confidence, buy direct from the german importer as we are Motografix importer and we have been committed to offering the highest quality products available on the market today. As you are dealing direct with the manufacturers importer and no middle man you can enjoy a fast despatch on all products straight from stock.
Products made by bikers for bikers.
Tip
R&G Fork Protectors Aprilia RS 660 / Tuono 660 2021-
€57.91*
These fork protectors help to eliminate damage to the front forks during a drop. The mounting screws are sunk and can not be sanded or abraded.Delivery: left & right side
suitable for: Aprilia RS 660 / Tuono 660 models from 2021- onwards.
Tip
R&G Carbon Tail Protector Aprilia RS 660 / Tuono 660 2021-
€126.90*
Our Tail Sliders are made from Carbon fibre which is Kevlar reinforced, offering excellent crash protection and wear resistance. Specially moulded to fit perfectly onto the tail, they are designed to fit onto the most pronounced corners and likely areas to get hit in the event of a crash or drop.
Application takes only minutes and they could save you having to replace your tank which can get dented or scratched in the event of a crash.
As used by the California Superbike School. (http://www.superbikeschool.com/)Delivery: left and right sideapproved by the California Superbike School (www.superbikeschool.co.uk).
Eazi-Grip EVO Tank Traction Pads Aprilia RS 660 / Tuono 660 2021-
€58.91*
We are a specialist UK manufacturer of Eazi-Grip™ high performance motorbike tank grips. We have worked in close association with leading teams in the BSB paddock and have developed a tank grip that features unique hemispherical traction domes that offer high levels of grip, combined with exceptional rider feel. We have over 100 models to choose from and give full technical back up from our experienced staff, who have track, road and race experience.
EAZI GRIP™ TANK GRIPS
Eazi-Grip™ Tank Grips have been specifically designed to assist in better bike control, enabling a rider to maintain a stable body position during cornering and braking, whilst also relieving rider fatigue
CUSTOM FIT TANK GRIPS
Eazi-Grip™ Tank Traction Pads are supplied pre-cut to fit a wide variety of bikes. For more unusual applications we also supply universal sheets that can be cut to the required profile. Eazi-Grip™ Tank Grips are available in black and clear.
HIGH QUALITY AND DURABLE
Eazi-Grip™ Tank Grips have a soft but durable domed surface providing the rider with increased control whilst reducing fatigue and minimising wear to the rider’s leathers.Advantages:
Abrasion-proof domed surface
Clear perusal to decor and finish
Removable without damaging the finish
Stabilizes the cornering performance as well as the braking and accelerating.
delivery included: left and right side
Color: black or clear (please choose)
Eazi Grip Evolution Traction pads are used from multiple Tourist Trophy
Winner Michael Dunlop on all his winner bikes.suitable for: Aprilia RS 660 / Tuono 660 models from 2021- onwards.
(round recess for manufacturer logo in pad included)
Eazi-Grip PRO Tank Traction Pads Aprilia RS 660 / Tuono 660 2021-
€54.89*
Eazi-Grip are pleased to announce a new addition to their Tank Grip range with the Eazi-Grip™ PRO Tank Traction Pad kits.
A progression from the Eazi-Grip™ original Traction Dome Tank Grip; developed with top teams in the British Superbike Championship and made in the UK, the self-adhesive tank grips are covered in a unique textured finish that at just 1mm thickness, has a crisp, slim-line profile and will increase the rider’s grip on the bike; drastically reducing body movement when braking and cornering, reducing arm pump and enabling a more stable body position.
The PRO Tank Traction Pad Kits are manufactured from pvc, a material that is extremely hard-wearing and durable, the textured pattern is designed for maximum grip, with minimum fatigue to rider clothing. Easy to fit, its high-strength adhesive backing ensures a highly durable product that will stay exactly where it is placed, as well as not affecting or damaging paintwork during removal or replacement.
Each Tank Traction Pad kit is supplied with precision pre-cut adhesive pieces, designed to fit the intended bike. Kits are currently offered for well over 100 different bike models, with new applications released almost weekly. EAZI Grip also offers a Universal Kit for bikes not currently provided for, or for bespoke tanks and project bikes.
All kits are available in a clear finish, to blend into the bike’s paintwork or in black to stand out and contrast.
The products are used by the top teams. Among them are, Quattro Plant Kawasaki, T3 Racing, Racing ILR or Chris Walker Racing.Advantages:
Abrasion-proof surface
Removable without damaging the finish
Stabilizes the cornering performance as well as the braking and accelerating.
delivery included: left and right side
Color: black or clearsuitable for: Aprilia RS 660 / Tuono 660 models from 2021- onwards.
(round recess for manufacturer logo in pad included)
Tip
R&G "Strong Race" Engine Case Cover Kit Aprilia RS - Tuono 660 2021- / Tuareg 660 2022-
€170.90*
R&G Race Series Engine Case Covers have been specifically developed in collaboration with selected high level BSB race teams and crash tested in BSB level racing events to ensure they meet and exceed all required standards for case protection.
R&G Racing Engine Case Cover Skidder Testimonial
In addition to the existing R&G Engine Case Cover range comes R&G's *NEW* 2015-spec Race Series Engine Case Covers, specially developed at the request of race teams and riders alike. They include a replaceable puck or slider on the impact face, giving the case not only more meat to grind through to further enhance the protection offered by a standard R&G Engine Case Cover but also offering an easy low-cost fix should you only have a "minor" slide, crash or drop. Engineered to allow just the "puck" to be replaced and your cover to be reused again and again!
Crafted from 4mm polypropylene for strength, durability (and good looks), they complement our crash protectors perfectly.
Easy to install, R&G Case Covers simply bolt on over the original engine casing, so no messing with adhesives, silicone or epoxies.
Slimline for maximum ground clearance, ultra lightweight, matt finish and protecting one of the most vulnerable parts of the machine, these could save you £'s in the event of an accident ... Ever seen the prices of a new engine casing or the cost of removing debris from your engine?Advantage over carbon protectors:
Product is screwed and not glued, which ensures a quick and easy installation and quick replacement.
Screws for mounting included.
This kit includes "Strong Race Covers":
-Left Hand Side Crankcase Cover (Alternator)
-Right Hand Side Crankcase Cover (Clutch)
Suitable for: Aprilia RS - Tuono 660 models from 2021- onwards and Tuareg 660 from 2022- onwards.approved by the California Superbike School (www.superbikeschool.co.uk).
Tip
R&G Eazi-Grip™ Boot Guard Pads Kit Aprilia RS 660 / Tuono 660 2021-
€39.90*
R&G Eazi-Grip™ Boot Guard kits are available for a large range of bike styles and brands, with new applications released regularly. The unique R&G Eazi-Grip™ texture was specifically designed to be durable, providing the rider with a buffer between his boot on the exposed areas of the swingarm or the frame which can (on occasion) come into contact with each other during cornering causing wear and unwanted damage to the swingarm, the frame or boots (both expensive to fix!).
Each Boot Guard kit is supplied with precision pre-cut adhesive pieces, designed to fit the intended bike, typically in either 2 or 4 pieces depending on the shape of the swingarm and frame. The high-strength adhesive backing ensures a highly durable product that will stay exactly where you put it, as well as not affecting or damaging paintwork. R&G Eazi-Grip™ Boot Guard kits are available in black finish to blend into your bike’s paintwork.
Made in the UK.Advantages:
Abrasion-proof surface
Protect your booth, the frame and the swingarm
Removable is very easy
protect the swingarm and frame
Color: blacksuitable for: Aprilia RS 660 / Tuono 660 models from 2021- onwards.
R&G Radiator Guard Aprilia RS 660 2021- (RAD0268)
€101.90*
R&G Radiator Guards are available in most cases in black or silver finish. They are made from pressed aluminium and feature a neat, seamless frame (where applicable). They improve the looks of your bike and help to protect your expensive and vulnerable radiator from flying debris.
No permanent modifications need to be made to the bike.Colour: black or silver (Shipping time for silver 1 week)suitable for: Aprilia RS 660 from 2021- onwards.
Tip
R&G Crash Protectors Kit "No Cut" Aprilia RS 660 2021-
€301.90*
These protectors are fitted across the two engine mounts for added strength. The mounting blocks are created from high grade, light weight, anodised aluminium to blend with the polished frame of this magnificent Italian beauty.Our real motorcycle crash pads are pads that you can save a lot of money and problems in the event of a fall!
Delivery: left and right sideSuitable for: Aprilia RS 660 from 2021- onwards.
Colour: black
Fairing Modification: No Mods
Mounting Position: Frame
R&G Eazi-Grip Tank Traction Pads Aprilia RS 660 / Tuono 660 2021-
€43.90*
R&G Tank Traction Grip kits are available for many different bike styles and brands, with new applications released regularly. The unique R&G Traction Grip texture was specifically designed to be both soft and durable, providing the rider with the grip and feel he/she needs to assist in better bike control, enabling the rider to maintain a stable body position while cornering and braking, whilst also relieving fatigue and providing the rider with complete confidence allowing him/her to fully focus on the road (or track) ahead instead of slipping and sliding on the tank.
Each Tank Traction Grip kit is supplied with precision pre-cut adhesive pieces, designed to fit the intended bike, typically in either 2, 4 or 6 pieces (in total) depending on the shape of the tank and adjoining fairing. The high-strength adhesive backing ensures a highly durable product that will stay exactly where you put it, as well as not affecting or damaging paintwork. Each R&G Tank Traction Grip kit is available in black and ultra-clear finishes to blend into your bike’s paintwork or stand out, depending on your preference. R&G Tank Traction Grips work in both wet and dry conditions and is equally at home on the track as it is on the commute home!
Please note: R&G Tank Traction Grips now come with a 25mm diameter stick on emblem.Advantages:
Abrasion-proof surface
Removable without damaging the finish
Stabilizes the cornering performance as well as the braking and accelerating.
delivery included: left and right side
Color: black or clearsuitable for: Aprilia RS 660 / Tuono 660 models from 2021- onwards,
R&G Racing Clutch Cover Protector Aprilia Shiver 900 2017-
€98.90*
R&G Racing clutch protector cover for Aprilia Shiver 900 from 2017- onwards.
These exciting new Engine Case Covers have been developed in collaboration with selected race teams and crash tested within the R&G Racing Suzuki GSX-R Trophy. Crafted from 4mm polypropylene for strength, durability and good looks, they complement our crash protectors perfectly.
The covers simply bolt on over the original engine casing so no messing with glue or removing anything. Slimline for maximum ground clearance, ultra lightweight, matt finish and protecting one of the most vulnerable parts of the machine, these could save you money in the event of an accident ... Ever seen the prices of a new engine casing or the cost of removing debris from your engine?Advantage over carbon protectors:
Product is screwed and not glued, which ensures a quick and easy installation and quick replacement.
Screws for mounting included.approved by the California Superbike School (www.superbikeschool.co.uk).
Eazi-Grip PRO Center Tank Pad DESIGN G
€26.91*
We are a specialist UK manufacturer of Eazi-Grip™ high performance motorbike tank grips. We have worked in close association with leading teams in the BSB paddock and have developed a tank pad that features unique hemispherical traction domes that offer high levels of grip, combined with exceptional rider feel. We have over 100 models to choose from and give full technical back up from our experienced staff, who have track, road and race experience.
EAZI GRIP™ TANK PADS
Eazi-Grip™ Tank PADS have been specifically designed to assist in better bike control, enabling a rider to maintain a stable body position during cornering and braking, whilst also relieving rider fatigue
CUSTOM FIT TANK PADS
Eazi-Grip™ Tank Traction Pads are supplied pre-cut to fit a wide variety of bikes. For more unusual applications we also supply universal sheets that can be cut to the required profile. Eazi-Grip™ Tank PADS are available in black and clear.
HIGH QUALITY AND DURABLE
Eazi-Grip™ Tank Grips have a soft but durable domed surface providing the rider with increased control whilst reducing fatigue and minimising wear to the rider’s leathers.Advantages:
Abrasion-proof domed surface
Clear perusal to decor and finish
Removable without damaging the finish
Stabilizes the cornering performance as well as the braking and accelerating.
The Tankpads are an excellent addition to our Eazi Grip Traction Pads for maximum grip.
Color: black or clear (please choose)suitable for: universal
(round recess for manufacturer logo in pad included)
R&G Eazi-Grip Tank Traction Pads Aprilia Shiver / Dorsoduro 900 2017-
€43.90*
R&G Tank Traction Grip kits are available for many different bike styles and brands, with new applications released regularly. The unique R&G Traction Grip texture was specifically designed to be both soft and durable, providing the rider with the grip and feel he/she needs to assist in better bike control, enabling the rider to maintain a stable body position while cornering and braking, whilst also relieving fatigue and providing the rider with complete confidence allowing him/her to fully focus on the road (or track) ahead instead of slipping and sliding on the tank.
Each Tank Traction Grip kit is supplied with precision pre-cut adhesive pieces, designed to fit the intended bike, typically in either 2, 4 or 6 pieces (in total) depending on the shape of the tank and adjoining fairing. The high-strength adhesive backing ensures a highly durable product that will stay exactly where you put it, as well as not affecting or damaging paintwork. Each R&G Tank Traction Grip kit is available in black and ultra-clear finishes to blend into your bike’s paintwork or stand out, depending on your preference. R&G Tank Traction Grips work in both wet and dry conditions and is equally at home on the track as it is on the commute home!
Please note: R&G Tank Traction Grips now come with a 25mm diameter stick on emblem.Advantages:
Abrasion-proof surface
Removable without damaging the finish
Stabilizes the cornering performance as well as the braking and accelerating.
delivery included: left and right side
Color: black or clearsuitable for: Aprilia Shiver / Dorsoduro 900 models from 2017- onwards,
Tip
R&G Rear Foot Rest Plates Set Aprilia RSV 4 RR / RF / Factory / Tuono V4 1100
€57.91*
Tidy up the rear of your bike, once you have removed the rear footrest pillion hangers, fill the void left behind and cover those exposed holes in the subframe with this pair of blanking plates. These blanking plates simply screws in, covering those otherwise exposed subframe holes left once the rear footrests have been removed keeping them free from of dirt and debris buildup protecting the threads from corrosion.suitable for: Aprilia RSV 4 RR / RF / Factory models and Aprilia Tuono V4 1100 models from 2015-2020.Delivery: 2 pieces (left and right side)
Tip
R&G Clutch / Brake Reservoir Protector / Sweatband
€9.90*
Keep your clutch or brake reservoir protected with our handy Clutch Reservoir Protector (Booty)!
This black elasticated protector features a white sewn R&G logo in two positions. It simply fits straight over your clutch reservoir keeping it well protected and cosy warm too!
R&G shock protector shocktube Aprilia RSV 4 2009-2014 / RS 660 / Tuono 660 2021-
€43.90*
The Shocktube is a high impact waterproof vented tube made from top quality bonded 100% CR Neoprene™ which is double lined with stretch nylon on both sides.
Completely enclosing the motorcycles rear shock absorber and spring, Shocktube prevents damage from road salt, water spray, stone chipping, dust and dirt.
The Shocktube can be fitted to most motorcycles with either monoshock or twin shock systems quickly, without the need to remove the shock absorber!
Continually protecting the rear shock absorber and spring, while still maintaining the condition of the shock for a substantially extended period of time, throughout the life of the motorcycle.
Patent No: GB2459728Colour: blacksuitable for: Aprilia RSV 4 models from 2009-2014 and RS 660 / Tuono 660 models from 2021- onwards.
R&G Racing Paddock Stand Bobbins colored M6 / M8
€16.90*
This paddock stand bobbins are screwed into the holes on the rear swingarm. Thus a raising of the motorcycle with a paddock stand no problem. Please refer to our Lightech or R & G Racing paddock stands.delivery: 2 pieces included with screws (for right and left side)
available colours: black, blue, gold, red, silver
available size: M6 or M8 threadIf you ordering, please let us know which size for thread and which colour you want.