R&G Yamaha Hebel Schützer

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filtering; again potentially causing brake/clutch engagement. R&G Moulded Lever Guards Easy to install (fitting just like an R&G Bar End Slider) installation takes only seconds. The special design combines super strength and lightweight properties thanks to its injection moulded design allowing race approved protection for your road or track bikes. Like so many race oriented products, these once quirky race bespoke products have now worked their way from the track to the road; so whether you're a professional racer, a track day enthusiast or simply a road rider! An R&G Lever Guard is a must have accessory.Key Features: - As used by the Moto Rapido BSB team, among others. - Compliant with FIM racing regulations. - Made from a tough and flexible grade of nylon. - Available in 5 colours (black, blue, red, orange, green). - Fit to both clutch and brake lever side. - Made from DuPont® Zytel® 70G33L Nylon - Supplied with all required hardware for the bespoke and racing bar applications.suitable for: Yamaha YZF-R 125 models from 2008-2018, (If you want for brake and clutch side, then you need 2 items) (only for original handlebars)

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filtering; again potentially causing brake/clutch engagement. R&G Moulded Lever Guards Easy to install (fitting just like an R&G Bar End Slider) installation takes only seconds. The special design combines super strength and lightweight properties thanks to its injection moulded design allowing race approved protection for your road or track bikes. Like so many race oriented products, these once quirky race bespoke products have now worked their way from the track to the road; so whether you're a professional racer, a track day enthusiast or simply a road rider! An R&G Lever Guard is a must have accessory.Key Features: - As used by the Moto Rapido BSB team, among others. - Compliant with FIM racing regulations. - Made from a tough and flexible grade of nylon. - Available in 5 colours (black, blue, red, orange, green). - Fit to both clutch and brake lever side. - Made from DuPont® Zytel® 70G33L Nylon - Supplied with all required hardware for the bespoke and racing bar applications.(If you want for brake and clutch side, then you need 2 items) (only for original handlebars)

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filtering; again potentially causing brake/clutch engagement. R&G Moulded Lever Guards Easy to install (fitting just like an R&G Bar End Slider) installation takes only seconds. The special design combines super strength and lightweight properties thanks to its injection moulded design allowing race approved protection for your road or track bikes. Like so many race oriented products, these once quirky race bespoke products have now worked their way from the track to the road; so whether you're a professional racer, a track day enthusiast or simply a road rider! An R&G Lever Guard is a must have accessory.Key Features: - As used by the Moto Rapido BSB team, among others. - Compliant with FIM racing regulations. - Made from a tough and flexible grade of nylon. - Available in 5 colours (black, blue, red, orange, green). - Fit to both clutch and brake lever side. - Made from DuPont® Zytel® 70G33L Nylon - Supplied with all required hardware for the bespoke and racing bar applications.suitable for: Yamaha YZF R6 from 2006-2016 and R7 from 2022- onwards. (If you want for brake and clutch side, then you need 2 items) (only for original handlebars)

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filtering; again potentially causing brake/clutch engagement. R&G Moulded Lever Guards Easy to install (fitting just like an R&G Bar End Slider) installation takes only seconds. The special design combines super strength and lightweight properties thanks to its injection moulded design allowing race approved protection for your road or track bikes. Like so many race oriented products, these once quirky race bespoke products have now worked their way from the track to the road; so whether you're a professional racer, a track day enthusiast or simply a road rider! An R&G Lever Guard is a must have accessory.Key Features: - As used by the Moto Rapido BSB team, among others. - Compliant with FIM racing regulations. - Made from a tough and flexible grade of nylon. - Available in 5 colours (black, blue, red, orange, green). - Fit to both clutch and brake lever side. - Made from DuPont® Zytel® 70G33L Nylon - Supplied with all required hardware for the bespoke and racing bar applications.suitable for: check application list. (If you want for brake and clutch side, then you need 2 items) (only for original handlebars)

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filtering; again potentially causing brake/clutch engagement. R&G Moulded Lever Guards Easy to install (fitting just like an R&G Bar End Slider) installation takes only seconds. The special design combines super strength and lightweight properties thanks to its injection moulded design allowing race approved protection for your road or track bikes. Like so many race oriented products, these once quirky race bespoke products have now worked their way from the track to the road; so whether you're a professional racer, a track day enthusiast or simply a road rider! An R&G Lever Guard is a must have accessory.Key Features: - As used by the Moto Rapido BSB team, among others. - Compliant with FIM racing regulations. - Made from a tough and flexible grade of nylon. - Available in 5 colours (black, blue, red, orange, green). - Fit to both clutch and brake lever side. - Made from DuPont® Zytel® 70G33L Nylon - Supplied with all required hardware for the bespoke and racing bar applications.(If you want for brake and clutch side, then you need 2 items) (only for original handlebars)

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filtering; again potentially causing brake/clutch engagement. R&G Moulded Lever Guards Easy to install (fitting just like an R&G Bar End Slider) installation takes only seconds. The special design combines super strength and lightweight properties thanks to its injection moulded design allowing race approved protection for your road or track bikes. Like so many race oriented products, these once quirky race bespoke products have now worked their way from the track to the road; so whether you're a professional racer, a track day enthusiast or simply a road rider! An R&G Lever Guard is a must have accessory.Key Features: - As used by the Moto Rapido BSB team, among others. - Compliant with FIM racing regulations. - Made from a tough and flexible grade of nylon. - Available in 5 colours (black, blue, red, orange, green). - Fit to both clutch and brake lever side. - Made from DuPont® Zytel® 70G33L Nylon - Supplied with all required hardware for the bespoke and racing bar applications.suitable for: Suzuki GSX-S 750 / Triumph Street Triple 765 / Yamaha R6 from 2017- onwards / Aprilia Tuono 660 from 2021- onwards and Honda MSX 125 / ST Dax 125. (If you want for brake and clutch side, then you need 2 items) (only for original handlebars)

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filtering; again potentially causing brake/clutch engagement. R&G Moulded Lever Guards Easy to install (fitting just like an R&G Bar End Slider) installation takes only seconds. The special design combines super strength and lightweight properties thanks to its injection moulded design allowing race approved protection for your road or track bikes. Like so many race oriented products, these once quirky race bespoke products have now worked their way from the track to the road; so whether you're a professional racer, a track day enthusiast or simply a road rider! An R&G Lever Guard is a must have accessory.Key Features: - As used by the Moto Rapido BSB team, among others. - Compliant with FIM racing regulations. - Made from a tough and flexible grade of nylon. - Available in 5 colours (black, blue, red, orange, green). - Fit to both clutch and brake lever side. - Made from DuPont® Zytel® 70G33L Nylon - Supplied with all required hardware for the bespoke and racing bar applications.suitable for: Yamaha YZF R6 from 1999-2005 and YZF R1 / MT-09 / Tracer 900 models all years, (If you want for brake and clutch side, then you need 2 items) (only for original handlebars)

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filtering; again potentially causing brake/clutch engagement. R&G Moulded Lever Guards Easy to install (fitting just like an R&G Bar End Slider) installation takes only seconds. The special design combines super strength and lightweight properties thanks to its injection moulded design allowing race approved protection for your road or track bikes. Like so many race oriented products, these once quirky race bespoke products have now worked their way from the track to the road; so whether you're a professional racer, a track day enthusiast or simply a road rider! An R&G Lever Guard is a must have accessory.Key Features: - As used by the Moto Rapido BSB team, among others. - Compliant with FIM racing regulations. - Made from a tough and flexible grade of nylon. - Available in 5 colours (black, blue, red, orange, green). - Fit to both clutch and brake lever side. - Made from DuPont® Zytel® 70G33L Nylon - Supplied with all required hardware for the bespoke and racing bar applications.suitable for: Yamaha YZF-R25 / YZF-R3 models all years, (If you want for brake and clutch side, then you need 2 items) (only for original handlebars)

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filtering; again potentially causing brake/clutch engagement. R&G Moulded Lever Guards Easy to install (fitting just like an R&G Bar End Slider) installation takes only seconds. The special design combines super strength and lightweight properties thanks to its injection moulded design allowing race approved protection for your road or track bikes. Like so many race oriented products, these once quirky race bespoke products have now worked their way from the track to the road; so whether you're a professional racer, a track day enthusiast or simply a road rider! An R&G Lever Guard is a must have accessory.Key Features: - As used by the Moto Rapido BSB team, among others. - Compliant with FIM racing regulations. - Made from a tough and flexible grade of nylon. - Available in 5 colours (black, blue, red, orange, green). - Fit to both clutch and brake lever side. - Made from DuPont® Zytel® 70G33L Nylon - Supplied with all required hardware for the bespoke and racing bar applications.suitable for: Yamaha T-MAX 530 from 2017- onwards and T-MAX 560 from 2020-2021. (If you want for brake and clutch side, then you need 2 items) (only for original handlebars)

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filtering; again potentially causing brake/clutch engagement. R&G Moulded Lever Guards Easy to install (fitting just like an R&G Bar End Slider) installation takes only seconds. The special design combines super strength and lightweight properties thanks to its injection moulded design allowing race approved protection for your road or track bikes. Like so many race oriented products, these once quirky race bespoke products have now worked their way from the track to the road; so whether you're a professional racer, a track day enthusiast or simply a road rider! An R&G Lever Guard is a must have accessory.Key Features: - As used by the Moto Rapido BSB team, among others. - Compliant with FIM racing regulations. - Made from a tough and flexible grade of nylon. - Available in 5 colours (black, blue, red, orange, green). - Fit to both clutch and brake lever side. - Made from DuPont® Zytel® 70G33L Nylon - Supplied with all required hardware for the bespoke and racing bar applications.(If you want for brake and clutch side, then you need 2 items) (only for original handlebars)

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filtering; again potentially causing brake/clutch engagement. R&G Moulded Lever Guards Easy to install (fitting just like an R&G Bar End Slider) installation takes only seconds. The special design combines super strength and lightweight properties thanks to its injection moulded design allowing race approved protection for your road or track bikes. Like so many race oriented products, these once quirky race bespoke products have now worked their way from the track to the road; so whether you're a professional racer, a track day enthusiast or simply a road rider! An R&G Lever Guard is a must have accessory.Key Features: - As used by the Moto Rapido BSB team, among others. - Compliant with FIM racing regulations. - Made from a tough and flexible grade of nylon. - Available in 5 colours (black, blue, red, orange, green). - Fit to both clutch and brake lever side. - Made from DuPont® Zytel® 70G33L Nylon - Supplied with all required hardware for the bespoke and racing bar applications.suitable for: Yamaha Tenere 700 and Kymco VSR 125 from 2019- and MT-09 from 2024- onwards. (If you want for brake and clutch side, then you need 2 items) (only for original handlebars)