Sicher fahren mit R&G Hebel Schützern

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filtering; again potentially causing brake/clutch engagement. R&G Moulded Lever Guards Easy to install (fitting just like an R&G Bar End Slider) installation takes only seconds. The special design combines super strength and lightweight properties thanks to its injection moulded design allowing race approved protection for your road or track bikes. Like so many race oriented products, these once quirky race bespoke products have now worked their way from the track to the road; so whether you're a professional racer, a track day enthusiast or simply a road rider! An R&G Lever Guard is a must have accessory.Key Features: - As used by the Moto Rapido BSB team, among others. - Compliant with FIM racing regulations. - Made from a tough and flexible grade of nylon. - Available in 5 colours (black, blue, red, orange, green). - Fit to both clutch and brake lever side. - Made from DuPont® Zytel® 70G33L Nylon - Supplied with all required hardware for the bespoke and racing bar applications.suitable for: Ducati Monster 796 / 1100 / 1200 up to year 2016 (Not for 1200R!) models all years. (If you want for brake and clutch side, then you need 2 items) (only for original handlebars)

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filtering; again potentially causing brake/clutch engagement. R&G Moulded Lever Guards Easy to install (fitting just like an R&G Bar End Slider) installation takes only seconds. The special design combines super strength and lightweight properties thanks to its injection moulded design allowing race approved protection for your road or track bikes. Like so many race oriented products, these once quirky race bespoke products have now worked their way from the track to the road; so whether you're a professional racer, a track day enthusiast or simply a road rider! An R&G Lever Guard is a must have accessory.Key Features: - As used by the Moto Rapido BSB team, among others. - Compliant with FIM racing regulations. - Made from a tough and flexible grade of nylon. - Available in 5 colours (black, blue, red, orange, green). - Fit to both clutch and brake lever side. - Made from DuPont® Zytel® 70G33L Nylon - Supplied with all required hardware for the bespoke and racing bar applications.suitable for: Ducati Panigale 899 / 1199 / 1299 / V4 models all years. (If you want for brake and clutch side, then you need 2 items) (only for original handlebars)

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filtering; again potentially causing brake/clutch engagement. R&G Moulded Lever Guards Easy to install (fitting just like an R&G Bar End Slider) installation takes only seconds. The special design combines super strength and lightweight properties thanks to its injection moulded design allowing race approved protection for your road or track bikes. Like so many race oriented products, these once quirky race bespoke products have now worked their way from the track to the road; so whether you're a professional racer, a track day enthusiast or simply a road rider! An R&G Lever Guard is a must have accessory.Key Features: - As used by the Moto Rapido BSB team, among others. - Compliant with FIM racing regulations. - Made from a tough and flexible grade of nylon. - Available in 5 colours (black, blue, red, orange, green). - Fit to both clutch and brake lever side. - Made from DuPont® Zytel® 70G33L Nylon - Supplied with all required hardware for the bespoke and racing bar applications.suitable for: Ducati Multistrada V2 / V4 models from 2021- onwards and Husqvarna Norden 901. (If you want for brake and clutch side, then you need 2 items)

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filtering; again potentially causing brake/clutch engagement. R&G Moulded Lever Guards Easy to install (fitting just like an R&G Bar End Slider) installation takes only seconds. The special design combines super strength and lightweight properties thanks to its injection moulded design allowing race approved protection for your road or track bikes. Like so many race oriented products, these once quirky race bespoke products have now worked their way from the track to the road; so whether you're a professional racer, a track day enthusiast or simply a road rider! An R&G Lever Guard is a must have accessory.Key Features: - As used by the Moto Rapido BSB team, among others. - Compliant with FIM racing regulations. - Made from a tough and flexible grade of nylon. - Available in 5 colours (black, blue, red, orange, green). - Fit to both clutch and brake lever side. - Made from DuPont® Zytel® 70G33L Nylon - Supplied with all required hardware for the bespoke and racing bar applications.suitable for: Ducati Monster 1200 / SuperSport models from 2017- onwards / Desert X and for Husqvarna Vitpilen 701 from 2018- onwards. (If you want for brake and clutch side, then you need 2 items) (only for original handlebars)

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filtering; again potentially causing brake/clutch engagement. R&G Moulded Lever Guards Easy to install (fitting just like an R&G Bar End Slider) installation takes only seconds. The special design combines super strength and lightweight properties thanks to its injection moulded design allowing race approved protection for your road or track bikes. Like so many race oriented products, these once quirky race bespoke products have now worked their way from the track to the road; so whether you're a professional racer, a track day enthusiast or simply a road rider! An R&G Lever Guard is a must have accessory.Key Features: - As used by the Moto Rapido BSB team, among others. - Compliant with FIM racing regulations. - Made from a tough and flexible grade of nylon. - Available in 5 colours (black, blue, red, orange, green). - Fit to both clutch and brake lever side. - Made from DuPont® Zytel® 70G33L Nylon - Supplied with all required hardware for the bespoke and racing bar applications.suitable for: Ducati Panigale 959 / V2 models all years. (If you want for brake and clutch side, then you need 2 items) (only for original handlebars)

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filtering; again potentially causing brake/clutch engagement. R&G Moulded Lever Guards Easy to install (fitting just like an R&G Bar End Slider) installation takes only seconds. The special design combines super strength and lightweight properties thanks to its injection moulded design allowing race approved protection for your road or track bikes. Like so many race oriented products, these once quirky race bespoke products have now worked their way from the track to the road; so whether you're a professional racer, a track day enthusiast or simply a road rider! An R&G Lever Guard is a must have accessory.Key Features: - As used by the Moto Rapido BSB team, among others. - Compliant with FIM racing regulations. - Made from a tough and flexible grade of nylon. - Available in 5 colours (black, blue, red, orange, green). - Fit to both clutch and brake lever side. - Made from DuPont® Zytel® 70G33L Nylon - Supplied with all required hardware for the bespoke and racing bar applications.suitable for: Ducati Multistrada 1200 models from 2010-2014. (If you want for brake and clutch side, then you need 2 items) (only for original handlebars)

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filtering; again potentially causing brake/clutch engagement. R&G Moulded Lever Guards Easy to install (fitting just like an R&G Bar End Slider) installation takes only seconds. The special design combines super strength and lightweight properties thanks to its injection moulded design allowing race approved protection for your road or track bikes. Like so many race oriented products, these once quirky race bespoke products have now worked their way from the track to the road; so whether you're a professional racer, a track day enthusiast or simply a road rider! An R&G Lever Guard is a must have accessory.Key Features: - As used by the Moto Rapido BSB team, among others. - Compliant with FIM racing regulations. - Made from a tough and flexible grade of nylon. - Available in 5 colours (black, blue, red, orange, green). - Fit to both clutch and brake lever side. - Made from DuPont® Zytel® 70G33L Nylon - Supplied with all required hardware for the bespoke and racing bar applications.suitable for: Ducati Diavel / XDiavel models all years. (If you want for brake and clutch side, then you need 2 items) (only for original handlebars)

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filtering; again potentially causing brake/clutch engagement. R&G Moulded Lever Guards Easy to install (fitting just like an R&G Bar End Slider) installation takes only seconds. The special design combines super strength and lightweight properties thanks to its injection moulded design allowing race approved protection for your road or track bikes. Like so many race oriented products, these once quirky race bespoke products have now worked their way from the track to the road; so whether you're a professional racer, a track day enthusiast or simply a road rider! An R&G Lever Guard is a must have accessory.Key Features: - As used by the Moto Rapido BSB team, among others. - Compliant with FIM racing regulations. - Made from a tough and flexible grade of nylon. - Available in 5 colours (black, blue, red, orange, green). - Fit to both clutch and brake lever side. - Made from DuPont® Zytel® 70G33L Nylon - Supplied with all required hardware for the bespoke and racing bar applications.suitable for: Ducati Monster 950 / 950+ models from 2021- onwards. (If you want for brake and clutch side, then you need 2 items) (only for original handlebars)

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filtering; again potentially causing brake/clutch engagement. R&G Moulded Lever Guards Easy to install (fitting just like an R&G Bar End Slider) installation takes only seconds. The special design combines super strength and lightweight properties thanks to its injection moulded design allowing race approved protection for your road or track bikes. Like so many race oriented products, these once quirky race bespoke products have now worked their way from the track to the road; so whether you're a professional racer, a track day enthusiast or simply a road rider! An R&G Lever Guard is a must have accessory.Key Features: - As used by the Moto Rapido BSB team, among others. - Compliant with FIM racing regulations. - Made from a tough and flexible grade of nylon. - Available in 5 colours (black, blue, red, orange, green). - Fit to both clutch and brake lever side. - Made from DuPont® Zytel® 70G33L Nylon - Supplied with all required hardware for the bespoke and racing bar applications.suitable for: Ducati 848 / 1098 / 1198 models all years. (If you want for brake and clutch side, then you need 2 items) (only for original handlebars)

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filtering; again potentially causing brake/clutch engagement. R&G Moulded Lever Guards Easy to install (fitting just like an R&G Bar End Slider) installation takes only seconds. The special design combines super strength and lightweight properties thanks to its injection moulded design allowing race approved protection for your road or track bikes. Like so many race oriented products, these once quirky race bespoke products have now worked their way from the track to the road; so whether you're a professional racer, a track day enthusiast or simply a road rider! An R&G Lever Guard is a must have accessory.Key Features: - As used by the Moto Rapido BSB team, among others. - Compliant with FIM racing regulations. - Made from a tough and flexible grade of nylon. - Available in 5 colours (black, blue, red, orange, green). - Fit to both clutch and brake lever side. - Made from DuPont® Zytel® 70G33L Nylon - Supplied with all required hardware for the bespoke and racing bar applications.suitable for: Ducati Streetfighter 848 models all years. (If you want for brake and clutch side, then you need 2 items) (only for original handlebars)

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filtering; again potentially causing brake/clutch engagement. R&G Moulded Lever Guards Easy to install (fitting just like an R&G Bar End Slider) installation takes only seconds. The special design combines super strength and lightweight properties thanks to its injection moulded design allowing race approved protection for your road or track bikes. Like so many race oriented products, these once quirky race bespoke products have now worked their way from the track to the road; so whether you're a professional racer, a track day enthusiast or simply a road rider! An R&G Lever Guard is a must have accessory.Key Features: - As used by the Moto Rapido BSB team, among others. - Compliant with FIM racing regulations. - Made from a tough and flexible grade of nylon. - Available in 5 colours (black, blue, red, orange, green). - Fit to both clutch and brake lever side. - Made from DuPont® Zytel® 70G33L Nylon - Supplied with all required hardware for the bespoke and racing bar applications.suitable for: Ducati 748 / 916 / 996 / 998 / 749 / 999 models all years. (If you want for brake and clutch side, then you need 2 items) (only for original handlebars)

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filtering; again potentially causing brake/clutch engagement. R&G Moulded Lever Guards Easy to install (fitting just like an R&G Bar End Slider) installation takes only seconds. The special design combines super strength and lightweight properties thanks to its injection moulded design allowing race approved protection for your road or track bikes. Like so many race oriented products, these once quirky race bespoke products have now worked their way from the track to the road; so whether you're a professional racer, a track day enthusiast or simply a road rider! An R&G Lever Guard is a must have accessory.Key Features: - As used by the Moto Rapido BSB team, among others. - Compliant with FIM racing regulations. - Made from a tough and flexible grade of nylon. - Available in 5 colours (black, blue, red, orange, green). - Fit to both clutch and brake lever side. - Made from DuPont® Zytel® 70G33L Nylon - Supplied with all required hardware for the bespoke and racing bar applications.suitable for: Ducati Monster 797 from 2017- onwards. (If you want for brake and clutch side, then you need 2 items) (only for original handlebars)

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filtering; again potentially causing brake/clutch engagement. R&G Moulded Lever Guards Easy to install (fitting just like an R&G Bar End Slider) installation takes only seconds. The special design combines super strength and lightweight properties thanks to its injection moulded design allowing race approved protection for your road or track bikes. Like so many race oriented products, these once quirky race bespoke products have now worked their way from the track to the road; so whether you're a professional racer, a track day enthusiast or simply a road rider! An R&G Lever Guard is a must have accessory.Key Features: - As used by the Moto Rapido BSB team, among others. - Compliant with FIM racing regulations. - Made from a tough and flexible grade of nylon. - Available in 5 colours (black, blue, red, orange, green). - Fit to both clutch and brake lever side. - Made from DuPont® Zytel® 70G33L Nylon - Supplied with all required hardware for the bespoke and racing bar applications.suitable for: Ducati Monster 1200 R from 2016- onwards / Scrambler 1100 models from 2018- onwards / Streetfighter V2 and KTM 690 SMC-R models from ´19- onwards. (If you want for brake and clutch side, then you need 2 items) (only for original handlebars)